About Kernel Documentation Linux Kernel Contact Linux Resources Linux Blog

Documentation / ABI / testing / sysfs-driver-hid-thingm




Custom Search

Based on kernel version 3.13. Page generated on 2014-01-20 22:00 EST.

1	What:		/sys/class/leds/blink1::<serial>/rgb
2	Date:		January 2013
3	Contact:	Vivien Didelot <vivien.didelot@savoirfairelinux.com>
4	Description:	The ThingM blink1 is an USB RGB LED. The color notation is
5			3-byte hexadecimal. Read this attribute to get the last set
6			color. Write the 24-bit hexadecimal color to change the current
7			LED color. The default color is full white (0xFFFFFF).
8			For instance, set the color to green with: echo 00FF00 > rgb
9	
10	What:		/sys/class/leds/blink1::<serial>/fade
11	Date:		January 2013
12	Contact:	Vivien Didelot <vivien.didelot@savoirfairelinux.com>
13	Description:	This attribute allows to set a fade time in milliseconds for
14			the next color change. Read the attribute to know the current
15			fade time. The default value is set to 0 (no fade time). For
16			instance, set a fade time of 2 seconds with: echo 2000 > fade
17	
18	What:		/sys/class/leds/blink1::<serial>/play
19	Date:		January 2013
20	Contact:	Vivien Didelot <vivien.didelot@savoirfairelinux.com>
21	Description:	This attribute is used to play/pause the light patterns. Write 1
22			to start playing, 0 to stop. Reading this attribute returns the
23			current playing status.
Hide Line Numbers
About Kernel Documentation Linux Kernel Contact Linux Resources Linux Blog

Information is copyright its respective author. All material is available from the Linux Kernel Source distributed under a GPL License. This page is provided as a free service by mjmwired.net.