About Kernel Documentation Linux Kernel Contact Linux Resources Linux Blog

Documentation / devicetree / bindings / regulator / tps51632-regulator.txt




Custom Search

Based on kernel version 3.15.4. Page generated on 2014-07-07 09:01 EST.

1	TPS51632 Voltage regulators
2	
3	Required properties:
4	- compatible: Must be "ti,tps51632"
5	- reg: I2C slave address
6	
7	Optional properties:
8	- ti,enable-pwm-dvfs: Enable the DVFS voltage control through the PWM interface.
9	- ti,dvfs-step-20mV: The 20mV step voltage when PWM DVFS enabled. Missing this
10		will set 10mV step voltage in PWM DVFS mode. In normal mode, the voltage
11		step is 10mV as per datasheet.
12	
13	Any property defined as part of the core regulator binding, defined in
14	regulator.txt, can also be used.
15	
16	Example:
17	
18		tps51632 {
19			compatible = "ti,tps51632";
20			reg =  <0x43>;
21			regulator-name = "tps51632-vout";
22			regulator-min-microvolt = <500000>;
23			regulator-max-microvolt = <1500000>;
24			regulator-boot-on;
25			ti,enable-pwm-dvfs;
26			ti,dvfs-step-20mV;
27		};
Hide Line Numbers
About Kernel Documentation Linux Kernel Contact Linux Resources Linux Blog

Information is copyright its respective author. All material is available from the Linux Kernel Source distributed under a GPL License. This page is provided as a free service by mjmwired.net.