About Kernel Documentation Linux Kernel Contact Linux Resources Linux Blog

Documentation / arm / SA1100 / CERF

Custom Search

Based on kernel version 4.13.3. Page generated on 2017-09-23 13:54 EST.

1	*** The StrongARM version of the CerfBoard/Cube has been discontinued ***
3	The Intrinsyc CerfBoard is a StrongARM 1110-based computer on a board
4	that measures approximately 2" square. It includes an Ethernet
5	controller, an RS232-compatible serial port, a USB function port, and
6	one CompactFlash+ slot on the back. Pictures can be found at the
7	Intrinsyc website, http://www.intrinsyc.com.
9	This document describes the support in the Linux kernel for the
10	Intrinsyc CerfBoard.
12	Supported in this version:
13	   - CompactFlash+ slot (select PCMCIA in General Setup and any options
14	     that may be required)
15	   - Onboard Crystal CS8900 Ethernet controller (Cerf CS8900A support in
16	     Network Devices)
17	   - Serial ports with a serial console (hardcoded to 38400 8N1)
19	In order to get this kernel onto your Cerf, you need a server that runs
20	both BOOTP and TFTP. Detailed instructions should have come with your
21	evaluation kit on how to use the bootloader. This series of commands
22	will suffice:
24	   make ARCH=arm CROSS_COMPILE=arm-linux- cerfcube_defconfig
25	   make ARCH=arm CROSS_COMPILE=arm-linux- zImage
26	   make ARCH=arm CROSS_COMPILE=arm-linux- modules
27	   cp arch/arm/boot/zImage <TFTP directory>
29	support@intrinsyc.com
Hide Line Numbers
About Kernel Documentation Linux Kernel Contact Linux Resources Linux Blog

Information is copyright its respective author. All material is available from the Linux Kernel Source distributed under a GPL License. This page is provided as a free service by mjmwired.net.