Documentation / devicetree / bindings / bus / brcm,gisb-arb.txt


Based on kernel version 5.16. Page generated on 2022-01-10 18:31 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34
Broadcom GISB bus Arbiter controller

Required properties:

- compatible:
    "brcm,bcm7278-gisb-arb" for V7 28nm chips
    "brcm,gisb-arb" or "brcm,bcm7445-gisb-arb" for other 28nm chips
    "brcm,bcm7435-gisb-arb" for newer 40nm chips
    "brcm,bcm7400-gisb-arb" for older 40nm chips and all 65nm chips
    "brcm,bcm7038-gisb-arb" for 130nm chips
- reg: specifies the base physical address and size of the registers
- interrupts: specifies the two interrupts (timeout and TEA) to be used from
  the parent interrupt controller. A third optional interrupt may be specified
  for breakpoints.

Optional properties:

- brcm,gisb-arb-master-mask: 32-bits wide bitmask used to specify which GISB
  masters are valid at the system level
- brcm,gisb-arb-master-names: string list of the litteral name of the GISB
  masters. Should match the number of bits set in brcm,gisb-master-mask and
  the order in which they appear

Example:

gisb-arb@f0400000 {
	compatible = "brcm,gisb-arb";
	reg = <0xf0400000 0x800>;
	interrupts = <0>, <2>;
	interrupt-parent = <&sun_l2_intc>;

	brcm,gisb-arb-master-mask = <0x7>;
	brcm,gisb-arb-master-names = "bsp_0", "scpu_0", "cpu_0";
};