Documentation / devicetree / bindings / clock / marvell,pxa910.txt


Based on kernel version 6.8. Page generated on 2024-03-11 21:26 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
* Marvell PXA910 Clock Controller

The PXA910 clock subsystem generates and supplies clock to various
controllers within the PXA910 SoC.

Required Properties:

- compatible: should be one of the following.
  - "marvell,pxa910-clock" - controller compatible with PXA910 SoC.

- reg: physical base address of the clock subsystem and length of memory mapped
  region. There are 4 places in SOC has clock control logic:
  "mpmu", "apmu", "apbc", "apbcp". So four reg spaces need to be defined.

- #clock-cells: should be 1.
- #reset-cells: should be 1.

Each clock is assigned an identifier and client nodes use this identifier
to specify the clock which they consume.

All these identifier could be found in <dt-bindings/clock/marvell-pxa910.h>.