Documentation / devicetree / bindings / i2c / i2c-img-scb.txt


Based on kernel version 6.8. Page generated on 2024-03-11 21:26 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
IMG Serial Control Bus (SCB) I2C Controller

Required Properties:
- compatible: "img,scb-i2c"
- reg: Physical base address and length of controller registers
- interrupts: Interrupt number used by the controller
- clocks : Should contain a clock specifier for each entry in clock-names
- clock-names : Should contain the following entries:
                "scb", for the SCB core clock.
                "sys", for the system clock.
- clock-frequency: The I2C bus frequency in Hz
- #address-cells: Should be <1>
- #size-cells: Should be <0>

Example:

i2c@18100000 {
	compatible = "img,scb-i2c";
	reg = <0x18100000 0x200>;
	interrupts = <GIC_SHARED 2 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&i2c0_clk>, <&system_clk>;
	clock-names = "scb", "sys";
	clock-frequency = <400000>;
	#address-cells = <1>;
	#size-cells = <0>;
};