Documentation / devicetree / bindings / mfd / fsl-imx25-tsadc.txt


Based on kernel version 6.8. Page generated on 2024-03-11 21:26 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
Freescale MX25 ADC/TSC MultiFunction Device (MFD)

This device combines two general purpose conversion queues one used for general
ADC and the other used for touchscreens.

Required properties:
 - compatible:			Should be "fsl,imx25-tsadc".
 - reg:				Start address and size of the memory area of
 					the device
 - interrupts:			Interrupt for this device
					(See: ../interrupt-controller/interrupts.txt)
 - clocks:			An 'ipg' clock (See: ../clock/clock-bindings.txt)
 - interrupt-controller:	This device is an interrupt controller. It
   					controls the interrupts of both
					conversion queues.
 - #interrupt-cells:		Should be '<1>'.
 - #address-cells:		Should be '<1>'.
 - #size-cells:			Should be '<1>'.

This device includes two conversion queues which can be added as subnodes.
The first queue is for the touchscreen, the second for general purpose ADC.

Example:
	tscadc: tscadc@50030000 {
		compatible = "fsl,imx25-tsadc";
		reg = <0x50030000 0xc>;
		interrupts = <46>;
		clocks = <&clks 119>;
		clock-names = "ipg";
		interrupt-controller;
		#interrupt-cells = <1>;
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;

		tsc: tcq@50030400 {
			compatible = "fsl,imx25-tcq";
			reg = <0x50030400 0x60>;
			...
		};

		adc: gcq@50030800 {
			compatible = "fsl,imx25-gcq";
			reg = <0x50030800 0x60>;
			...
		};
	};