Based on kernel version 4.0. Page generated on 2015-04-14 21:21 EST.
1 * Broadcom BCM7xxx Ethernet Systemport Controller (SYSTEMPORT) 2 3 Required properties: 4 - compatible: should be one of "brcm,systemport-v1.00" or "brcm,systemport" 5 - reg: address and length of the register set for the device. 6 - interrupts: interrupts for the device, first cell must be for the rx 7 interrupts, and the second cell should be for the transmit queues. An 8 optional third interrupt cell for Wake-on-LAN can be specified 9 - local-mac-address: Ethernet MAC address (48 bits) of this adapter 10 - phy-mode: Should be a string describing the PHY interface to the 11 Ethernet switch/PHY, see Documentation/devicetree/bindings/net/ethernet.txt 12 - fixed-link: see Documentation/devicetree/bindings/net/fixed-link.txt for 13 the property specific details 14 15 Optional properties: 16 - systemport,num-tier2-arb: number of tier 2 arbiters, an integer 17 - systemport,num-tier1-arb: number of tier 1 arbiters, an integer 18 - systemport,num-txq: number of HW transmit queues, an integer 19 - systemport,num-rxq: number of HW receive queues, an integer 20 21 Example: 22 ethernet@f04a0000 { 23 compatible = "brcm,systemport-v1.00"; 24 reg = <0xf04a0000 0x4650>; 25 local-mac-address = [ 00 11 22 33 44 55 ]; 26 fixed-link = <0 1 1000 0 0>; 27 phy-mode = "gmii"; 28 interrupts = <0x0 0x16 0x0>, 29 <0x0 0x17 0x0>; 30 };