Documentation / devicetree / bindings / net / fsl-fman.txt


Based on kernel version 6.8. Page generated on 2024-03-11 21:26 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548
=============================================================================
Freescale Frame Manager Device Bindings

CONTENTS
  - FMan Node
  - FMan Port Node
  - FMan MURAM Node
  - FMan dTSEC/XGEC/mEMAC Node
  - FMan IEEE 1588 Node
  - FMan MDIO Node
  - Example

=============================================================================
FMan Node

DESCRIPTION

Due to the fact that the FMan is an aggregation of sub-engines (ports, MACs,
etc.) the FMan node will have child nodes for each of them.

PROPERTIES

- compatible
		Usage: required
		Value type: <stringlist>
		Definition: Must include "fsl,fman"
		FMan version can be determined via FM_IP_REV_1 register in the
		FMan block. The offset is 0xc4 from the beginning of the
		Frame Processing Manager memory map (0xc3000 from the
		beginning of the FMan node).

- cell-index
		Usage: required
		Value type: <u32>
		Definition: Specifies the index of the FMan unit.

		The cell-index value may be used by the SoC, to identify the
		FMan unit in the SoC memory map. In the table below,
		there's a description of the cell-index use in each SoC:

		- P1023:
		register[bit]			FMan unit	cell-index
		============================================================
		DEVDISR[1]			1		0

		- P2041, P3041, P4080 P5020, P5040:
		register[bit]			FMan unit	cell-index
		============================================================
		DCFG_DEVDISR2[6]		1		0
		DCFG_DEVDISR2[14]		2		1
			(Second FM available only in P4080 and P5040)

		- B4860, T1040, T2080, T4240:
		register[bit]			FMan unit	cell-index
		============================================================
		DCFG_CCSR_DEVDISR2[24]		1		0
		DCFG_CCSR_DEVDISR2[25]		2		1
			(Second FM available only in T4240)

		DEVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in
		the specific SoC "Device Configuration/Pin Control" Memory
		Map.

- reg
		Usage: required
		Value type: <prop-encoded-array>
		Definition: A standard property. Specifies the offset of the
		following configuration registers:
		- BMI configuration registers.
		- QMI configuration registers.
		- DMA configuration registers.
		- FPM configuration registers.
		- FMan controller configuration registers.

- ranges
		Usage: required
		Value type: <prop-encoded-array>
		Definition: A standard property.

- clocks
		Usage: required
		Value type: <prop-encoded-array>
		Definition: phandle for the fman input clock.

- clock-names
		usage: required
		Value type: <stringlist>
		Definition: "fmanclk" for the fman input clock.

- interrupts
		Usage: required
		Value type: <prop-encoded-array>
		Definition: A pair of IRQs are specified in this property.
		The first element is associated with the event interrupts and
		the second element is associated with the error interrupts.

- fsl,qman-channel-range
		Usage: required
		Value type: <prop-encoded-array>
		Definition: Specifies the range of the available dedicated
		channels in the FMan. The first cell specifies the beginning
		of the range and the second cell specifies the number of
		channels.
		Further information available at:
		"Work Queue (WQ) Channel Assignments in the QMan" section
		in DPAA Reference Manual.

- fsl,qman
- fsl,bman
		Usage: required
		Definition: See soc/fsl/qman.txt and soc/fsl/bman.txt

- fsl,erratum-a050385
		Usage: optional
		Value type: boolean
		Definition: A boolean property. Indicates the presence of the
		erratum A050385 which indicates that DMA transactions that are
		split can result in a FMan lock.

=============================================================================
FMan MURAM Node

DESCRIPTION

FMan Internal memory - shared between all the FMan modules.
It contains data structures that are common and written to or read by
the modules.
FMan internal memory is split into the following parts:
	Packet buffering (Tx/Rx FIFOs)
	Frames internal context

PROPERTIES

- compatible
		Usage: required
		Value type: <stringlist>
		Definition: Must include "fsl,fman-muram"

- ranges
		Usage: required
		Value type: <prop-encoded-array>
		Definition: A standard property.
		Specifies the multi-user memory offset and the size within
		the FMan.

EXAMPLE

muram@0 {
	compatible = "fsl,fman-muram";
	ranges = <0 0x000000 0x28000>;
};

=============================================================================
FMan Port Node

DESCRIPTION

The Frame Manager (FMan) supports several types of hardware ports:
	Ethernet receiver (RX)
	Ethernet transmitter (TX)
	Offline/Host command (O/H)

PROPERTIES

- compatible
		Usage: required
		Value type: <stringlist>
		Definition: A standard property.
		Must include one of the following:
			- "fsl,fman-v2-port-oh" for FManV2 OH ports
			- "fsl,fman-v2-port-rx" for FManV2 RX ports
			- "fsl,fman-v2-port-tx" for FManV2 TX ports
			- "fsl,fman-v3-port-oh" for FManV3 OH ports
			- "fsl,fman-v3-port-rx" for FManV3 RX ports
			- "fsl,fman-v3-port-tx" for FManV3 TX ports

- cell-index
		Usage: required
		Value type: <u32>
		Definition: Specifies the hardware port id.
		Each hardware port on the FMan has its own hardware PortID.
		Super set of all hardware Port IDs available at FMan Reference
		Manual under "FMan Hardware Ports in Freescale Devices" table.

		Each hardware port is assigned a 4KB, port-specific page in
		the FMan hardware port memory region (which is part of the
		FMan memory map). The first 4 KB in the FMan hardware ports
		memory region is used for what are called common registers.
		The subsequent 63 4KB pages are allocated to the hardware
		ports.
		The page of a specific port is determined by the cell-index.

- reg
		Usage: required
		Value type: <prop-encoded-array>
		Definition: There is one reg region describing the port
		configuration registers.

- fsl,fman-10g-port
		Usage: optional
		Value type: boolean
		Definition: The default port rate is 1G.
		If this property exists, the port is s 10G port.

- fsl,fman-best-effort-port
		Usage: optional
		Value type: boolean
		Definition: Can be defined only if 10G-support is set.
		This property marks a best-effort 10G port (10G port that
		may not be capable of line rate).

EXAMPLE

port@a8000 {
	cell-index = <0x28>;
	compatible = "fsl,fman-v2-port-tx";
	reg = <0xa8000 0x1000>;
};

port@88000 {
	cell-index = <0x8>;
	compatible = "fsl,fman-v2-port-rx";
	reg = <0x88000 0x1000>;
};

port@81000 {
	cell-index = <0x1>;
	compatible = "fsl,fman-v2-port-oh";
	reg = <0x81000 0x1000>;
};

=============================================================================
FMan dTSEC/XGEC/mEMAC Node

Refer to Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml

============================================================================
FMan IEEE 1588 Node

Refer to Documentation/devicetree/bindings/ptp/ptp-qoriq.txt

=============================================================================
FMan MDIO Node

DESCRIPTION

The MDIO is a bus to which the PHY devices are connected.

PROPERTIES

- compatible
		Usage: required
		Value type: <stringlist>
		Definition: A standard property.
		Must include "fsl,fman-mdio" for 1 Gb/s MDIO from FMan v2.
		Must include "fsl,fman-xmdio" for 10 Gb/s MDIO from FMan v2.
		Must include "fsl,fman-memac-mdio" for 1/10 Gb/s MDIO from
		FMan v3.

- reg
		Usage: required
		Value type: <prop-encoded-array>
		Definition: A standard property.

- clocks
		Usage: optional
		Value type: <phandle>
		Definition: A reference to the input clock of the controller
		from which the MDC frequency is derived.

- clock-frequency
		Usage: optional
		Value type: <u32>
		Definition: Specifies the external MDC frequency, in Hertz, to
		be used. Requires that the input clock is specified in the
		"clocks" property. See also: mdio.yaml.

- suppress-preamble
		Usage: optional
		Value type: <boolean>
		Definition: Disable generation of preamble bits. See also:
		mdio.yaml.

- interrupts
		Usage: required for external MDIO
		Value type: <prop-encoded-array>
		Definition: Event interrupt of external MDIO controller.

- fsl,fman-internal-mdio
		Usage: required for internal MDIO
		Value type: boolean
		Definition: Fman has internal MDIO for internal PCS(Physical
		Coding Sublayer) PHYs and external MDIO for external PHYs.
		The settings and programming routines for internal/external
		MDIO are different. Must be included for internal MDIO.

- fsl,erratum-a009885
		Usage: optional
		Value type: <boolean>
		Definition: Indicates the presence of the A009885
		erratum describing that the contents of MDIO_DATA may
		become corrupt unless it is read within 16 MDC cycles
		of MDIO_CFG[BSY] being cleared, when performing an
		MDIO read operation.

- fsl,erratum-a011043
		Usage: optional
		Value type: <boolean>
		Definition: Indicates the presence of the A011043 erratum
		describing that the MDIO_CFG[MDIO_RD_ER] bit may be falsely
		set when reading internal PCS registers. MDIO reads to
		internal PCS registers may result in having the
		MDIO_CFG[MDIO_RD_ER] bit set, even when there is no error and
		read data (MDIO_DATA[MDIO_DATA]) is correct.
		Software may get false read error when reading internal
		PCS registers through MDIO. As a workaround, all internal
		MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit.

For internal PHY device on internal mdio bus, a PHY node should be created.
See the definition of the PHY node in booting-without-of.txt for an
example of how to define a PHY (Internal PHY has no interrupt line).
- For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY.
- For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS PHY.
  The PCS PHY address should correspond to the value of the appropriate
  MDEV_PORT.

EXAMPLE

Example for FMan v2 external MDIO:

mdio@f1000 {
	compatible = "fsl,fman-xmdio";
	reg = <0xf1000 0x1000>;
	interrupts = <101 2 0 0>;
};

Example for FMan v2 internal MDIO:

mdio@e3120 {
	compatible = "fsl,fman-mdio";
	reg = <0xe3120 0xee0>;
	fsl,fman-internal-mdio;

	tbi1: tbi-phy@8 {
		reg = <0x8>;
		device_type = "tbi-phy";
	};
};

Example for FMan v3 internal MDIO:

mdio@f1000 {
	compatible = "fsl,fman-memac-mdio";
	reg = <0xf1000 0x1000>;
	fsl,fman-internal-mdio;

	pcsphy6: ethernet-phy@0 {
		reg = <0x0>;
	};
};

=============================================================================
Example

fman@400000 {
	#address-cells = <1>;
	#size-cells = <1>;
	cell-index = <1>;
	compatible = "fsl,fman"
	ranges = <0 0x400000 0x100000>;
	reg = <0x400000 0x100000>;
	clocks = <&fman_clk>;
	clock-names = "fmanclk";
	interrupts = <
		96 2 0 0
		16 2 1 1>;
	fsl,qman-channel-range = <0x40 0xc>;

	muram@0 {
		compatible = "fsl,fman-muram";
		reg = <0x0 0x28000>;
	};

	port@81000 {
		cell-index = <1>;
		compatible = "fsl,fman-v2-port-oh";
		reg = <0x81000 0x1000>;
	};

	port@82000 {
		cell-index = <2>;
		compatible = "fsl,fman-v2-port-oh";
		reg = <0x82000 0x1000>;
	};

	port@83000 {
		cell-index = <3>;
		compatible = "fsl,fman-v2-port-oh";
		reg = <0x83000 0x1000>;
	};

	port@84000 {
		cell-index = <4>;
		compatible = "fsl,fman-v2-port-oh";
		reg = <0x84000 0x1000>;
	};

	port@85000 {
		cell-index = <5>;
		compatible = "fsl,fman-v2-port-oh";
		reg = <0x85000 0x1000>;
	};

	port@86000 {
		cell-index = <6>;
		compatible = "fsl,fman-v2-port-oh";
		reg = <0x86000 0x1000>;
	};

	fman1_rx_0x8: port@88000 {
		cell-index = <0x8>;
		compatible = "fsl,fman-v2-port-rx";
		reg = <0x88000 0x1000>;
	};

	fman1_rx_0x9: port@89000 {
		cell-index = <0x9>;
		compatible = "fsl,fman-v2-port-rx";
		reg = <0x89000 0x1000>;
	};

	fman1_rx_0xa: port@8a000 {
		cell-index = <0xa>;
		compatible = "fsl,fman-v2-port-rx";
		reg = <0x8a000 0x1000>;
	};

	fman1_rx_0xb: port@8b000 {
		cell-index = <0xb>;
		compatible = "fsl,fman-v2-port-rx";
		reg = <0x8b000 0x1000>;
	};

	fman1_rx_0xc: port@8c000 {
		cell-index = <0xc>;
		compatible = "fsl,fman-v2-port-rx";
		reg = <0x8c000 0x1000>;
	};

	fman1_rx_0x10: port@90000 {
		cell-index = <0x10>;
		compatible = "fsl,fman-v2-port-rx";
		reg = <0x90000 0x1000>;
	};

	fman1_tx_0x28: port@a8000 {
		cell-index = <0x28>;
		compatible = "fsl,fman-v2-port-tx";
		reg = <0xa8000 0x1000>;
	};

	fman1_tx_0x29: port@a9000 {
		cell-index = <0x29>;
		compatible = "fsl,fman-v2-port-tx";
		reg = <0xa9000 0x1000>;
	};

	fman1_tx_0x2a: port@aa000 {
		cell-index = <0x2a>;
		compatible = "fsl,fman-v2-port-tx";
		reg = <0xaa000 0x1000>;
	};

	fman1_tx_0x2b: port@ab000 {
		cell-index = <0x2b>;
		compatible = "fsl,fman-v2-port-tx";
		reg = <0xab000 0x1000>;
	};

	fman1_tx_0x2c: port@ac0000 {
		cell-index = <0x2c>;
		compatible = "fsl,fman-v2-port-tx";
		reg = <0xac000 0x1000>;
	};

	fman1_tx_0x30: port@b0000 {
		cell-index = <0x30>;
		compatible = "fsl,fman-v2-port-tx";
		reg = <0xb0000 0x1000>;
	};

	ethernet@e0000 {
		compatible = "fsl,fman-dtsec";
		cell-index = <0>;
		reg = <0xe0000 0x1000>;
		fsl,fman-ports = <&fman1_rx_0x8 &fman1_tx_0x28>;
		tbi-handle = <&tbi5>;
	};

	ethernet@e2000 {
		compatible = "fsl,fman-dtsec";
		cell-index = <1>;
		reg = <0xe2000 0x1000>;
		fsl,fman-ports = <&fman1_rx_0x9 &fman1_tx_0x29>;
		tbi-handle = <&tbi6>;
	};

	ethernet@e4000 {
		compatible = "fsl,fman-dtsec";
		cell-index = <2>;
		reg = <0xe4000 0x1000>;
		fsl,fman-ports = <&fman1_rx_0xa &fman1_tx_0x2a>;
		tbi-handle = <&tbi7>;
	};

	ethernet@e6000 {
		compatible = "fsl,fman-dtsec";
		cell-index = <3>;
		reg = <0xe6000 0x1000>;
		fsl,fman-ports = <&fman1_rx_0xb &fman1_tx_0x2b>;
		tbi-handle = <&tbi8>;
	};

	ethernet@e8000 {
		compatible = "fsl,fman-dtsec";
		cell-index = <4>;
		reg = <0xf0000 0x1000>;
		fsl,fman-ports = <&fman1_rx_0xc &fman1_tx_0x2c>;
		tbi-handle = <&tbi9>;

	ethernet@f0000 {
		cell-index = <8>;
		compatible = "fsl,fman-xgec";
		reg = <0xf0000 0x1000>;
		fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>;
	};

	ptp-timer@fe000 {
		compatible = "fsl,fman-ptp-timer";
		reg = <0xfe000 0x1000>;
	};

	mdio@f1000 {
		compatible = "fsl,fman-xmdio";
		reg = <0xf1000 0x1000>;
		interrupts = <101 2 0 0>;
	};
};