Based on kernel version 4.9. Page generated on 2016-12-21 14:31 EST.
1 * Amlogic USB2 PHY 2 3 Required properties: 4 - compatible: Depending on the platform this should be one of: 5 "amlogic,meson8b-usb2-phy" 6 "amlogic,meson-gxbb-usb2-phy" 7 - reg: The base address and length of the registers 8 - #phys-cells: should be 0 (see phy-bindings.txt in this directory) 9 - clocks: phandle and clock identifier for the phy clocks 10 - clock-names: "usb_general" and "usb" 11 12 Optional properties: 13 - resets: reference to the reset controller 14 - phy-supply: see phy-bindings.txt in this directory 15 16 17 Example: 18 19 usb0_phy: usb_phy@0 { 20 compatible = "amlogic,meson-gxbb-usb2-phy"; 21 #phy-cells = <0>; 22 reg = <0x0 0x0 0x0 0x20>; 23 resets = <&reset RESET_USB_OTG>; 24 clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>; 25 clock-names = "usb_general", "usb"; 26 phy-supply = <&usb_vbus>; 27 };