Based on kernel version 6.8
. Page generated on 2024-03-11 21:26 EST
.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 | * Powerventure Semiconductor PV88090 Voltage Regulator Required properties: - compatible: "pvs,pv88090". - reg: I2C slave address, usually 0x48. - interrupts: the interrupt outputs of the controller - regulators: A node that houses a sub-node for each regulator within the device. Each sub-node is identified using the node's name, with valid values listed below. The content of each sub-node is defined by the standard binding for regulators; see regulator.txt. BUCK1, BUCK2, BUCK3, LDO1, and LDO2. Optional properties: - Any optional property defined in regulator.txt Example pmic: pv88090@48 { compatible = "pvs,pv88090"; reg = <0x48>; interrupt-parent = <&gpio>; interrupts = <24 24>; regulators { BUCK1 { regulator-name = "buck1"; regulator-min-microvolt = < 600000>; regulator-max-microvolt = <1393750>; regulator-min-microamp = < 220000>; regulator-max-microamp = <7040000>; regulator-boot-on; }; BUCK2 { regulator-name = "buck2"; regulator-min-microvolt = < 600000>; regulator-max-microvolt = <1393750>; regulator-min-microamp = <1496000>; regulator-max-microamp = <4189000>; }; BUCK3 { regulator-name = "buck3"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <1393750>; regulator-min-microamp = <1496000>; regulator-max-microamp = <4189000>; regulator-boot-on; }; LDO1 { regulator-name = "ldo1"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <4350000>; regulator-boot-on; }; LDO2 { regulator-name = "ldo2"; regulator-min-microvolt = < 650000>; regulator-max-microvolt = <2225000>; regulator-boot-on; }; }; }; |