Based on kernel version 6.8
. Page generated on 2024-03-11 21:26 EST
.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 | SMSC USB4604 High-Speed Hub Controller Required properties: - compatible: Should be "smsc,usb4604" Optional properties: - reg: Specifies the i2c slave address, it is required and should be 0x2d if I2C is used. - reset-gpios: Should specify GPIO for reset. - initial-mode: Should specify initial mode. (1 for HUB mode, 2 for STANDBY mode) Examples: usb-hub@2d { compatible = "smsc,usb4604"; reg = <0x2d>; reset-gpios = <&gpx3 5 1>; initial-mode = <1>; }; |