Based on kernel version 4.16.1. Page generated on 2018-04-09 11:53 EST.
1 Kernel driver isl29003 2 ===================== 3 4 Supported chips: 5 * Intersil ISL29003 6 Prefix: 'isl29003' 7 Addresses scanned: none 8 Datasheet: 9 http://www.intersil.com/data/fn/fn7464.pdf 10 11 Author: Daniel Mack <daniel@caiaq.de> 12 13 14 Description 15 ----------- 16 The ISL29003 is an integrated light sensor with a 16-bit integrating type 17 ADC, I2C user programmable lux range select for optimized counts/lux, and 18 I2C multi-function control and monitoring capabilities. The internal ADC 19 provides 16-bit resolution while rejecting 50Hz and 60Hz flicker caused by 20 artificial light sources. 21 22 The driver allows to set the lux range, the bit resolution, the operational 23 mode (see below) and the power state of device and can read the current lux 24 value, of course. 25 26 27 Detection 28 --------- 29 30 The ISL29003 does not have an ID register which could be used to identify 31 it, so the detection routine will just try to read from the configured I2C 32 address and consider the device to be present as soon as it ACKs the 33 transfer. 34 35 36 Sysfs entries 37 ------------- 38 39 range: 40 0: 0 lux to 1000 lux (default) 41 1: 0 lux to 4000 lux 42 2: 0 lux to 16,000 lux 43 3: 0 lux to 64,000 lux 44 45 resolution: 46 0: 2^16 cycles (default) 47 1: 2^12 cycles 48 2: 2^8 cycles 49 3: 2^4 cycles 50 51 mode: 52 0: diode1's current (unsigned 16bit) (default) 53 1: diode1's current (unsigned 16bit) 54 2: difference between diodes (l1 - l2, signed 15bit) 55 56 power_state: 57 0: device is disabled (default) 58 1: device is enabled 59 60 lux (read only): 61 returns the value from the last sensor reading