Documentation / devicetree / bindings / arm / sunxi / allwinner,sun4i-a10-mbus.yaml


Based on kernel version 6.8. Page generated on 2024-03-11 21:26 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/arm/sunxi/allwinner,sun4i-a10-mbus.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Allwinner Memory Bus (MBUS) controller

maintainers:
  - Chen-Yu Tsai <wens@csie.org>
  - Maxime Ripard <mripard@kernel.org>

description: |
  The MBUS controller drives the MBUS that other devices in the SoC
  will use to perform DMA. It also has a register interface that
  allows to monitor and control the bandwidth and priorities for
  masters on that bus.
 
  Each device having to perform their DMA through the MBUS must have
  the interconnects and interconnect-names properties set to the MBUS
  controller and with "dma-mem" as the interconnect name.

properties:
  "#interconnect-cells":
    const: 1
    description:
      The content of the cell is the MBUS ID.

  compatible:
    enum:
      - allwinner,sun5i-a13-mbus
      - allwinner,sun8i-a33-mbus
      - allwinner,sun8i-a50-mbus
      - allwinner,sun8i-a83t-mbus
      - allwinner,sun8i-h3-mbus
      - allwinner,sun8i-r40-mbus
      - allwinner,sun8i-v3s-mbus
      - allwinner,sun8i-v536-mbus
      - allwinner,sun20i-d1-mbus
      - allwinner,sun50i-a64-mbus
      - allwinner,sun50i-a100-mbus
      - allwinner,sun50i-h5-mbus
      - allwinner,sun50i-h6-mbus
      - allwinner,sun50i-h616-mbus
      - allwinner,sun50i-r329-mbus

  reg:
    minItems: 1
    items:
      - description: MBUS interconnect/bandwidth limit/PMU registers
      - description: DRAM controller/PHY registers

  reg-names:
    minItems: 1
    items:
      - const: mbus
      - const: dram

  clocks:
    minItems: 1
    items:
      - description: MBUS interconnect module clock
      - description: DRAM controller/PHY module clock
      - description: Register bus clock, shared by MBUS and DRAM

  clock-names:
    minItems: 1
    items:
      - const: mbus
      - const: dram
      - const: bus

  interrupts:
    maxItems: 1
    description:
      MBUS PMU activity interrupt.

  dma-ranges:
    description:
      See section 2.3.9 of the DeviceTree Specification.
 
  '#address-cells': true
 
  '#size-cells': true

required:
  - "#interconnect-cells"
  - compatible
  - reg
  - clocks
  - dma-ranges

if:
  not:
    properties:
      compatible:
        contains:
          enum:
            - allwinner,sun5i-a13-mbus
            - allwinner,sun8i-r40-mbus

then:
  properties:
    reg:
      minItems: 2

    reg-names:
      minItems: 2

    clocks:
      minItems: 3

    clock-names:
      minItems: 3

  required:
    - reg-names
    - clock-names

else:
  properties:
    reg:
      maxItems: 1

    reg-names:
      maxItems: 1

    clocks:
      maxItems: 1

    clock-names:
      maxItems: 1

additionalProperties: false

examples:
  - |
    #include <dt-bindings/clock/sun50i-a64-ccu.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>
 
    dram-controller@1c01000 {
        compatible = "allwinner,sun5i-a13-mbus";
        reg = <0x01c01000 0x1000>;
        clocks = <&ccu CLK_MBUS>;
        #address-cells = <1>;
        #size-cells = <1>;
        dma-ranges = <0x00000000 0x40000000 0x20000000>;
        #interconnect-cells = <1>;
    };

  - |
    dram-controller@1c62000 {
        compatible = "allwinner,sun50i-a64-mbus";
        reg = <0x01c62000 0x1000>,
              <0x01c63000 0x1000>;
        reg-names = "mbus", "dram";
        clocks = <&ccu CLK_MBUS>,
                 <&ccu CLK_DRAM>,
                 <&ccu CLK_BUS_DRAM>;
        clock-names = "mbus", "dram", "bus";
        interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
        #address-cells = <1>;
        #size-cells = <1>;
        dma-ranges = <0x00000000 0x40000000 0xc0000000>;
        #interconnect-cells = <1>;
    };

...