# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/input/qcom,pm8921-keypad.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm PM8921 PMIC KeyPad

maintainers:
  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

allOf:
  - $ref: input.yaml#
  - $ref: matrix-keymap.yaml#

properties:
  compatible:
    enum:
      - qcom,pm8058-keypad
      - qcom,pm8921-keypad

  reg:
    maxItems: 1

  interrupts:
    items:
      - description: key sense
      - description: key stuck

  wakeup-source:
    type: boolean
    description: use any event on keypad as wakeup event

  linux,keypad-wakeup:
    type: boolean
    deprecated: true
    description: legacy version of the wakeup-source property

  debounce:
    description:
      Time in microseconds that key must be pressed or
      released for state change interrupt to trigger.
    $ref: /schemas/types.yaml#/definitions/uint32

  scan-delay:
    $ref: /schemas/types.yaml#/definitions/uint32
    description: time in microseconds to pause between successive scans of the
      matrix array

  row-hold:
    $ref: /schemas/types.yaml#/definitions/uint32
    description: time in nanoseconds to pause between scans of each row in the
      matrix array.

required:
  - compatible
  - reg
  - interrupts
  - linux,keymap

unevaluatedProperties: false

examples:
  - |
   #include <dt-bindings/input/input.h>
   #include <dt-bindings/interrupt-controller/irq.h>
   pmic {
       #address-cells = <1>;
       #size-cells = <0>;
 
       keypad@148 {
           compatible = "qcom,pm8921-keypad";
           reg = <0x148>;
           interrupt-parent = <&pmicintc>;
           interrupts = <74 IRQ_TYPE_EDGE_RISING>, <75 IRQ_TYPE_EDGE_RISING>;
           linux,keymap = <
               MATRIX_KEY(0, 0, KEY_VOLUMEUP)
               MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
               MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
               MATRIX_KEY(0, 3, KEY_CAMERA)
           >;
           keypad,num-rows = <1>;
           keypad,num-columns = <5>;
           debounce = <15>;
           scan-delay = <32>;
           row-hold = <91500>;
       };
   };
...