Based on kernel version 5.15
. Page generated on 2021-11-01 09:19 EST
.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 | TI Wilink 6/7/8 (wl12xx/wl18xx) SDIO devices This node provides properties for controlling the wilink wireless device. The node is expected to be specified as a child node to the SDIO controller that connects the device to the system. Required properties: - compatible: should be one of the following: * "ti,wl1271" * "ti,wl1273" * "ti,wl1281" * "ti,wl1283" * "ti,wl1285" * "ti,wl1801" * "ti,wl1805" * "ti,wl1807" * "ti,wl1831" * "ti,wl1835" * "ti,wl1837" - interrupts : specifies attributes for the out-of-band interrupt. Optional properties: - ref-clock-frequency : ref clock frequency in Hz - tcxo-clock-frequency : tcxo clock frequency in Hz Note: the *-clock-frequency properties assume internal clocks. In case of external clock, new bindings (for parsing the clock nodes) have to be added. Example: &mmc3 { vmmc-supply = <&wlan_en_reg>; bus-width = <4>; cap-power-off-card; keep-power-in-suspend; #address-cells = <1>; #size-cells = <0>; wlcore: wlcore@2 { compatible = "ti,wl1835"; reg = <2>; interrupt-parent = <&gpio0>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; }; }; |