Documentation / devicetree / bindings / soc / fsl / qman-portals.txt


Based on kernel version 6.8. Page generated on 2024-03-11 21:26 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134
QorIQ DPAA Queue Manager Portals Device Tree Binding

Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.

CONTENTS

	- QMan Portal
	- Example

QMan Portal Node

Portals are memory mapped interfaces to QMan that allow low-latency, lock-less
interaction by software running on processor cores, accelerators and network
interfaces with the QMan

PROPERTIES

- compatible
	Usage:		Required
	Value type:	<stringlist>
	Definition:	Must include "fsl,qman-portal-<hardware revision>"
			May include "fsl,<SoC>-qman-portal" or "fsl,qman-portal"

- reg
	Usage:		Required
	Value type:	<prop-encoded-array>
	Definition:	Two regions. The first is the cache-enabled region of
			the portal. The second is the cache-inhibited region of
			the portal

- interrupts
	Usage:		Required
	Value type:	<prop-encoded-array>
	Definition:	Standard property

- fsl,liodn
	Usage:		See pamu.txt
	Value type:	<prop-encoded-array>
	Definition:	Two LIODN(s). DQRR LIODN (DLIODN) and Frame LIODN
			(FLIODN)

- fsl,iommu-parent
	Usage:		See pamu.txt
	Value type:	<phandle>
	Definition:	PAMU property used for dynamic LIODN assignment

	For additional details about the PAMU/LIODN binding(s) see pamu.txt

- cell-index
	Usage:		Required
	Value type:	<u32>
	Definition:	The hardware index of the channel. This can also be
			determined by dividing any of the channel's 8 work queue
			IDs by 8

In addition to these properties the qman-portals should have sub-nodes to
represent the HW devices/portals that are connected to the software portal
described here

The currently supported sub-nodes are:
	* fman0
	* fman1
	* pme
	* crypto

These subnodes should have the following properties:

- fsl,liodn
	Usage:		See pamu.txt
	Value type:	<prop-encoded-array>
	Definition:	PAMU property used for static LIODN assignment

- fsl,iommu-parent
	Usage:		See pamu.txt
	Value type:	<phandle>
	Definition:	PAMU property used for dynamic LIODN assignment

- dev-handle
	Usage:		Required
	Value type:	<phandle>
	Definition:	The phandle to the particular hardware device that this
			portal is connected to.

EXAMPLE

The example below shows a (P4080) QMan portals container/bus node with two portals

	qman-portals@ff4200000 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "simple-bus";
		ranges = <0 0xf 0xf4200000 0x200000>;

		qman-portal@0 {
			compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal";
			reg = <0 0x4000>, <0x100000 0x1000>;
			interrupts = <104 2 0 0>;
			fsl,liodn = <1 2>;
			fsl,qman-channel-id = <0>;

			fman0 {
				fsl,liodn = <0x21>;
				dev-handle = <&fman0>;
			};
			fman1 {
				fsl,liodn = <0xa1>;
				dev-handle = <&fman1>;
			};
			crypto {
				fsl,liodn = <0x41 0x66>;
				dev-handle = <&crypto>;
			};
		};
		qman-portal@4000 {
			compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal";
			reg = <0x4000 0x4000>, <0x101000 0x1000>;
			interrupts = <106 2 0 0>;
			fsl,liodn = <3 4>;
			cell-index = <1>;

			fman0 {
				fsl,liodn = <0x22>;
				dev-handle = <&fman0>;
			};
			fman1 {
				fsl,liodn = <0xa2>;
				dev-handle = <&fman1>;
			};
			crypto {
				fsl,liodn = <0x42 0x67>;
				dev-handle = <&crypto>;
			};
		};
	};