OMAP Timer bindings

Required properties:
- compatible:		Should be set to one of the below. Please note that
			OMAP44xx devices have timer instances that are 100%
			register compatible with OMAP3xxx devices as well as
			newer timers that are not 100% register compatible.
			So for OMAP44xx devices timer instances may use
			different compatible strings.

			ti,omap2420-timer (applicable to OMAP24xx devices)
			ti,omap3430-timer (applicable to OMAP3xxx/44xx devices)
			ti,omap4430-timer (applicable to OMAP44xx devices)
			ti,omap5430-timer (applicable to OMAP543x devices)
			ti,am335x-timer	(applicable to AM335x devices)
			ti,am335x-timer-1ms (applicable to AM335x devices)

- reg:			Contains timer register address range (base address and
			length).
- interrupts: 		Contains the interrupt information for the timer. The
			format is being dependent on which interrupt controller
			the OMAP device uses.
- ti,hwmods:		Name of the hwmod associated to the timer, "timer<X>",
			where <X> is the instance number of the timer from the
			HW spec.

Optional properties:
- ti,timer-alwon:	Indicates the timer is in an alway-on power domain.
- ti,timer-dsp:		Indicates the timer can interrupt the on-chip DSP in
			addition to the ARM CPU.
- ti,timer-pwm: 	Indicates the timer can generate a PWM output.
- ti,timer-secure: 	Indicates the timer is reserved on a secure OMAP device
			and therefore cannot be used by the kernel.

Example:

timer12: timer@48304000 {
	compatible = "ti,omap3430-timer";
	reg = <0x48304000 0x400>;
	interrupts = <95>;
	ti,hwmods = "timer12"
	ti,timer-alwon;
	ti,timer-secure;
};