Based on kernel version 6.2.16. Page generated on 2023-08-29 08:28 EST.
| 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 | =================================== Simtec Electronics EB2410ITX (BAST) =================================== http://www.simtec.co.uk/products/EB2410ITX/ Introduction ------------ The EB2410ITX is a S3C2410 based development board with a variety of peripherals and expansion connectors. This board is also known by the shortened name of Bast. Configuration ------------- To set the default configuration, use `make bast_defconfig` which supports the commonly used features of this board. Support ------- Official support information can be found on the Simtec Electronics website, at the product page http://www.simtec.co.uk/products/EB2410ITX/ Useful links: - Resources Page http://www.simtec.co.uk/products/EB2410ITX/resources.html - Board FAQ at http://www.simtec.co.uk/products/EB2410ITX/faq.html - Bootloader info http://www.simtec.co.uk/products/SWABLE/resources.html and FAQ http://www.simtec.co.uk/products/SWABLE/faq.html MTD --- The NAND and NOR support has been merged from the linux-mtd project. Any problems, see http://www.linux-mtd.infradead.org/ for more information or up-to-date versions of linux-mtd. IDE --- Both onboard IDE ports are supported, however there is no support for changing speed of devices, PIO Mode 4 capable drives should be used. Maintainers ----------- This board is maintained by Simtec Electronics. Copyright 2004 Ben Dooks, Simtec Electronics |