Based on kernel version 5.15
. Page generated on 2021-11-01 09:19 EST
.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 | NTC Thermistor hwmon sensors ------------------------------- Requires node properties: - "compatible" value : one of "epcos,b57330v2103" "epcos,b57891s0103" "murata,ncp15wb473" "murata,ncp18wb473" "murata,ncp21wb473" "murata,ncp03wb473" "murata,ncp15wl333" "murata,ncp03wf104" "murata,ncp15xh103" /* Usage of vendor name "ntc" is deprecated */ <DEPRECATED> "ntc,ncp15wb473" <DEPRECATED> "ntc,ncp18wb473" <DEPRECATED> "ntc,ncp21wb473" <DEPRECATED> "ntc,ncp03wb473" <DEPRECATED> "ntc,ncp15wl333" - "pullup-uv" Pull up voltage in micro volts - "pullup-ohm" Pull up resistor value in ohms - "pulldown-ohm" Pull down resistor value in ohms - "connected-positive" Always ON, If not specified. Status change is possible. - "io-channels" Channel node of ADC to be used for conversion. Optional node properties: - "#thermal-sensor-cells" Used to expose itself to thermal fw. Read more about iio bindings at https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/ Example: ncp15wb473@0 { compatible = "murata,ncp15wb473"; pullup-uv = <1800000>; pullup-ohm = <47000>; pulldown-ohm = <0>; io-channels = <&adc 3>; }; |