Documentation / devicetree / bindings / input / touchscreen / elan,elants_i2c.yaml


Based on kernel version 6.8. Page generated on 2024-03-11 21:26 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/input/touchscreen/elan,elants_i2c.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Elantech I2C Touchscreen

maintainers:
  - David Heidelberg <david@ixit.cz>

allOf:
  - $ref: touchscreen.yaml#

properties:
  compatible:
    oneOf:
      - enum:
          - elan,ektf3624
          - elan,ekth3500
      - items:
          - const: elan,ekth3915
          - const: elan,ekth3500

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  wakeup-source:
    type: boolean
    description: touchscreen can be used as a wakeup source.

  reset-gpios:
    maxItems: 1
    description: reset gpio the chip is connected to.

  vcc33-supply:
    description: a phandle for the regulator supplying 3.3V power.

  vccio-supply:
    description: a phandle for the regulator supplying IO power.

  touchscreen-inverted-x: true
  touchscreen-inverted-y: true
  touchscreen-size-x: true
  touchscreen-size-y: true
  touchscreen-swapped-x-y: true

additionalProperties: false

required:
  - compatible
  - reg
  - interrupts

examples:
  - |
    #include <dt-bindings/interrupt-controller/irq.h>
 
    i2c {
        #address-cells = <1>;
        #size-cells = <0>;
 
        touchscreen@10 {
            compatible = "elan,ekth3500";
            reg = <0x10>;
 
            interrupt-parent = <&gpio4>;
            interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>;
            wakeup-source;
        };
    };