About Kernel Documentation Linux Kernel Contact Linux Resources Linux Blog

Documentation / devicetree / bindings / pinctrl / pinctrl-vt8500.txt

Custom Search

Based on kernel version 4.13.3. Page generated on 2017-09-23 13:55 EST.

1	VIA VT8500 and Wondermedia WM8xxx-series pinmux/gpio controller
3	These SoCs contain a combined Pinmux/GPIO module. Each pin may operate as
4	either a GPIO in, GPIO out or as an alternate function (I2C, SPI etc).
6	Required properties:
7	- compatible: "via,vt8500-pinctrl", "wm,wm8505-pinctrl", "wm,wm8650-pinctrl",
8		"wm8750-pinctrl" or "wm,wm8850-pinctrl"
9	- reg: Should contain the physical address of the module's registers.
10	- interrupt-controller: Marks the device node as an interrupt controller.
11	- #interrupt-cells: Should be two.
12	- gpio-controller: Marks the device node as a GPIO controller.
13	- #gpio-cells : Should be two. The first cell is the pin number and the
14	  second cell is used to specify optional parameters.
15		bit 0 - active low
17	Please refer to ../gpio/gpio.txt for a general description of GPIO bindings.
19	Please refer to pinctrl-bindings.txt in this directory for details of the
20	common pinctrl bindings used by client devices, including the meaning of the
21	phrase "pin configuration node".
23	Each pin configuration node lists the pin(s) to which it applies, and one or
24	more of the mux functions to select on those pin(s), and pull-up/down
25	configuration. Each subnode only affects those parameters that are explicitly
26	listed. In other words, a subnode that lists only a mux function implies no
27	information about any pull configuration. Similarly, a subnode that lists only
28	a pull parameter implies no information about the mux function.
30	Required subnode-properties:
31	- wm,pins: An array of cells. Each cell contains the ID of a pin.
33	Optional subnode-properties:
34	- wm,function: Integer, containing the function to mux to the pin(s):
35	  0: GPIO in
36	  1: GPIO out
37	  2: alternate
39	- wm,pull: Integer, representing the pull-down/up to apply to the pin(s):
40	  0: none
41	  1: down
42	  2: up
44	Each of wm,function and wm,pull may contain either a single value which
45	will be applied to all pins in wm,pins, or one value for each entry in
46	wm,pins.
48	Example:
50		pinctrl: pinctrl {
51			compatible = "wm,wm8505-pinctrl";
52			reg = <0xD8110000 0x10000>;
53			interrupt-controller;
54			#interrupt-cells = <2>;
55			gpio-controller;
56			#gpio-cells = <2>;
57		};
Hide Line Numbers
About Kernel Documentation Linux Kernel Contact Linux Resources Linux Blog

Information is copyright its respective author. All material is available from the Linux Kernel Source distributed under a GPL License. This page is provided as a free service by mjmwired.net.