About Kernel Documentation Linux Kernel Contact Linux Resources Linux Blog

Documentation / arm / SA1100 / ADSBitsy




Custom Search

Based on kernel version 3.15.4. Page generated on 2014-07-07 08:59 EST.

1	ADS Bitsy Single Board Computer
2	(It is different from Bitsy(iPAQ) of Compaq)
3	
4	For more details, contact Applied Data Systems or see
5	http://www.applieddata.net/products.html
6	
7	The Linux support for this product has been provided by
8	Woojung Huh <whuh@applieddata.net>
9	
10	Use 'make adsbitsy_config' before any 'make config'.
11	This will set up defaults for ADS Bitsy support.
12	
13	The kernel zImage is linked to be loaded and executed at 0xc0400000.
14	
15	Linux can  be used with the ADS BootLoader that ships with the
16	newer rev boards. See their documentation on how to load Linux.
17	
18	Supported peripherals:
19	- SA1100 LCD frame buffer (8/16bpp...sort of)
20	- SA1111 USB Master
21	- SA1100 serial port
22	- pcmcia, compact flash
23	- touchscreen(ucb1200)
24	- console on LCD screen
25	- serial ports (ttyS[0-2])
26	  - ttyS0 is default for serial console
27	
28	To do:
29	- everything else!  :-)
30	
31	Notes:
32	
33	- The flash on board is divided into 3 partitions.
34	  You should be careful to use flash on board.
35	  Its partition is different from GraphicsClient Plus and GraphicsMaster
36	
37	- 16bpp mode requires a different cable than what ships with the board.
38	  Contact ADS or look through the manual to wire your own. Currently,
39	  if you compile with 16bit mode support and switch into a lower bpp
40	  mode, the timing is off so the image is corrupted.  This will be
41	  fixed soon.
42	
43	Any contribution can be sent to nico@fluxnic.net and will be greatly welcome!
Hide Line Numbers
About Kernel Documentation Linux Kernel Contact Linux Resources Linux Blog

Information is copyright its respective author. All material is available from the Linux Kernel Source distributed under a GPL License. This page is provided as a free service by mjmwired.net.