About Kernel Documentation Linux Kernel Contact Linux Resources Linux Blog

Documentation / devicetree / bindings / media / st-rc.txt




Custom Search

Based on kernel version 3.13. Page generated on 2014-01-20 22:01 EST.

1	Device-Tree bindings for ST IRB IP
2	
3	Required properties:
4		- compatible: Should contain "st,comms-irb".
5		- reg: Base physical address of the controller and length of memory
6		  mapped region.
7		- interrupts: interrupt-specifier for the sole interrupt generated by
8		  the device. The interrupt specifier format depends on the interrupt
9		  controller parent.
10		- rx-mode: can be "infrared" or "uhf". This property specifies the L1
11		  protocol used for receiving remote control signals. rx-mode should
12		  be present iff the rx pins are wired up.
13		- tx-mode: should be "infrared". This property specifies the L1
14		  protocol used for transmitting remote control signals. tx-mode should
15		  be present iff the tx pins are wired up.
16	
17	Optional properties:
18		- pinctrl-names, pinctrl-0: the pincontrol settings to configure muxing
19		  properly for IRB pins.
20		- clocks : phandle with clock-specifier pair for IRB.
21	
22	Example node:
23	
24		rc: rc@fe518000 {
25			compatible	= "st,comms-irb";
26			reg		= <0xfe518000 0x234>;
27			interrupts	= <0 203 0>;
28			rx-mode		= "infrared";
29		};
Hide Line Numbers
About Kernel Documentation Linux Kernel Contact Linux Resources Linux Blog

Information is copyright its respective author. All material is available from the Linux Kernel Source distributed under a GPL License. This page is provided as a free service by mjmwired.net.