Documentation / devicetree / bindings / mfd / richtek,rt5120.yaml


Based on kernel version 6.8. Page generated on 2024-03-11 21:26 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/richtek,rt5120.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Richtek RT5120 PMIC

maintainers:
  - ChiYuan Huang <cy_huang@richtek.com>

description: |
  The RT5120 provides four high-efficiency buck converters and one LDO voltage
  regulator. The device is targeted at providingthe processor voltage, memory,
  I/O, and peripheral rails in home entertainment devices. The I2C interface is
  used for dynamic voltage scaling of the processor voltage, power rails on/off
  sequence control, operation mode selection.

properties:
  compatible:
    enum:
      - richtek,rt5120

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  interrupt-controller: true
 
  "#interrupt-cells":
    const: 1

  wakeup-source: true

  richtek,enable-undervolt-hiccup:
    type: boolean
    description: |
      If used, under voltage protection trigger hiccup behavior, else latchup as
      default

  richtek,enable-overvolt-hiccup:
    type: boolean
    description:
      Like as 'enable-uv-hiccup', it configures over voltage protection to
      hiccup, else latchup as default

  vin1-supply:
    description: phandle for buck1 input power source

  vin2-supply:
    description: phandle for buck2 input power source

  vin3-supply:
    description: phandle for buck3 input power source

  vin4-supply:
    description: phandle for buck4 input power source

  vinldo-supply:
    description: phandle for ldo input power source

  regulators:
    type: object

    patternProperties:
      "^buck[1-4]$":
        type: object
        $ref: /schemas/regulator/regulator.yaml#
        unevaluatedProperties: false

        properties:
          regulator-allowed-modes:
            description: |
              Used to specify the allowed buck converter operating mode
              mode mapping:
                0: auto mode
                1: force pwm mode
            items:
              enum: [0, 1]
 
      "^(ldo|exten)$":
        type: object
        $ref: /schemas/regulator/regulator.yaml#
        unevaluatedProperties: false

    additionalProperties: false

  powerkey:
    type: object
    description:
      PON key that connected to RT5120 PMIC.

    properties:
      compatible:
        enum:
          - richtek,rt5120-pwrkey

    required:
      - compatible

    additionalProperties: false

required:
  - compatible
  - reg
  - interrupts
  - '#interrupt-cells'
  - interrupt-controller
  - regulators
  - powerkey

additionalProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/irq.h>
 
    i2c {
      #address-cells = <1>;
      #size-cells = <0>;
 
      pmic@62 {
        compatible = "richtek,rt5120";
        reg = <0x62>;
        interrupts-extended = <&gpio_intc 32 IRQ_TYPE_LEVEL_LOW>;
        interrupt-controller;
        #interrupt-cells = <1>;
        wakeup-source;
 
        regulators {
          buck1 {
            regulator-name = "rt5120-buck1";
            regulator-min-microvolt = <600000>;
            regulator-max-microvolt = <1393750>;
            regulator-allowed-modes = <0 1>;
            regulator-boot-on;
          };
          buck2 {
            regulator-name = "rt5120-buck2";
            regulator-min-microvolt = <1100000>;
            regulator-max-microvolt = <1100000>;
            regulator-allowed-modes = <0 1>;
            regulator-always-on;
          };
          buck3 {
            regulator-name = "rt5120-buck3";
            regulator-min-microvolt = <1800000>;
            regulator-max-microvolt = <1800000>;
            regulator-allowed-modes = <0 1>;
            regulator-always-on;
          };
          buck4 {
            regulator-name = "rt5120-buck4";
            regulator-min-microvolt = <3300000>;
            regulator-max-microvolt = <3300000>;
            regulator-allowed-modes = <0 1>;
            regulator-always-on;
          };
          ldo {
            regulator-name = "rt5120-ldo";
            regulator-min-microvolt = <1800000>;
            regulator-max-microvolt = <1800000>;
            regulator-always-on;
          };
          exten {
            regulator-name = "rt5120-exten";
            regulator-min-microvolt = <3000000>;
            regulator-max-microvolt = <3000000>;
            regulator-always-on;
          };
        };
        powerkey {
          compatible = "richtek,rt5120-pwrkey";
        };
      };
    };