Based on kernel version 6.8. Page generated on 2024-03-11 21:26 EST.
| 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 | # SPDX-License-Identifier: GPL-2.0-only %YAML 1.2 --- $id: http://devicetree.org/schemas/mfd/samsung,s2mps11.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S2MPS11/13/14/15 and S2MPU02 Power Management IC maintainers: - Krzysztof Kozlowski <krzk@kernel.org> description: | This is a part of device tree bindings for S2M and S5M family of Power Management IC (PMIC). The Samsung S2MPS11/13/14/15 and S2MPU02 is a family of Power Management IC which include voltage and current regulators, RTC, clock outputs and other sub-blocks. properties: compatible: enum: - samsung,s2mps11-pmic - samsung,s2mps13-pmic - samsung,s2mps14-pmic - samsung,s2mps15-pmic - samsung,s2mpu02-pmic clocks: $ref: ../clock/samsung,s2mps11.yaml description: Child node describing clock provider. interrupts: maxItems: 1 reg: maxItems: 1 regulators: type: object description: List of child nodes that specify the regulators. samsung,s2mps11-acokb-ground: description: | Indicates that ACOKB pin of S2MPS11 PMIC is connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1 register to turn off the power. Usually the ACOKB is pulled up to VBATT so when PWRHOLD pin goes low, the rising ACOKB will trigger power off. type: boolean samsung,s2mps11-wrstbi-ground: description: | Indicates that WRSTBI pin of PMIC is pulled down. When the system is suspended it will always go down thus triggerring unwanted buck warm reset (setting buck voltages to default values). type: boolean wakeup-source: true required: - compatible - reg - regulators additionalProperties: false allOf: - if: properties: compatible: contains: const: samsung,s2mps11-pmic then: properties: regulators: $ref: ../regulator/samsung,s2mps11.yaml samsung,s2mps11-wrstbi-ground: false - if: properties: compatible: contains: const: samsung,s2mps13-pmic then: properties: regulators: $ref: ../regulator/samsung,s2mps13.yaml samsung,s2mps11-acokb-ground: false - if: properties: compatible: contains: const: samsung,s2mps14-pmic then: properties: regulators: $ref: ../regulator/samsung,s2mps14.yaml samsung,s2mps11-acokb-ground: false samsung,s2mps11-wrstbi-ground: false - if: properties: compatible: contains: const: samsung,s2mps15-pmic then: properties: regulators: $ref: ../regulator/samsung,s2mps15.yaml samsung,s2mps11-acokb-ground: false samsung,s2mps11-wrstbi-ground: false - if: properties: compatible: contains: const: samsung,s2mpu02-pmic then: properties: regulators: $ref: ../regulator/samsung,s2mpu02.yaml samsung,s2mps11-acokb-ground: false samsung,s2mps11-wrstbi-ground: false examples: - | #include <dt-bindings/interrupt-controller/irq.h> i2c { #address-cells = <1>; #size-cells = <0>; pmic@66 { compatible = "samsung,s2mps11-pmic"; reg = <0x66>; interrupt-parent = <&gpx0>; interrupts = <4 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&s2mps11_irq>; samsung,s2mps11-acokb-ground; wakeup-source; clocks { compatible = "samsung,s2mps11-clk"; #clock-cells = <1>; clock-output-names = "s2mps11_ap", "s2mps11_cp", "s2mps11_bt"; }; regulators { LDO1 { regulator-name = "vdd_ldo1"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; LDO4 { regulator-name = "vdd_adc"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-off-in-suspend; }; }; // .... BUCK1 { regulator-name = "vdd_mif"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1300000>; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; BUCK2 { regulator-name = "vdd_arm"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; regulator-coupled-with = <&buck3_reg>; regulator-coupled-max-spread = <300000>; regulator-state-mem { regulator-off-in-suspend; }; }; BUCK3 { regulator-name = "vdd_int"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; regulator-always-on; regulator-boot-on; regulator-coupled-with = <&buck2_reg>; regulator-coupled-max-spread = <300000>; regulator-state-mem { regulator-off-in-suspend; }; }; // ... }; }; }; - | #include <dt-bindings/interrupt-controller/irq.h> i2c { #address-cells = <1>; #size-cells = <0>; pmic@66 { compatible = "samsung,s2mps14-pmic"; reg = <0x66>; interrupt-parent = <&gpx0>; interrupts = <7 IRQ_TYPE_LEVEL_LOW>; wakeup-source; clocks { compatible = "samsung,s2mps14-clk"; #clock-cells = <1>; clock-output-names = "s2mps14_ap", "unused", "s2mps14_bt"; }; regulators { LDO1 { regulator-name = "VLDO1_1.0V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; regulator-state-mem { regulator-on-in-suspend; }; }; // ... BUCK1 { regulator-name = "VBUCK1_1.0V"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1000000>; regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; }; // ... }; }; }; |