About Kernel Documentation Linux Kernel Contact Linux Resources Linux Blog

Documentation / serial / digiepca.txt




Custom Search

Based on kernel version 3.14.11. Page generated on 2014-07-07 08:56 EST.

1	NOTE:  This driver is obsolete.  Digi provides a 2.6 driver (dgdm) at
2	http://www.digi.com for PCI cards.  They no longer maintain this driver,
3	and have no 2.6 driver for ISA cards.
4	
5	This driver requires a number of user-space tools.  They can be acquired from
6	http://www.digi.com, but only works with 2.4 kernels.
7	
8	
9	The Digi Intl. epca driver. 
10	----------------------------
11	The Digi Intl. epca driver for Linux supports the following boards:
12	
13	Digi PC/Xem, PC/Xr, PC/Xe, PC/Xi, PC/Xeve 
14	Digi EISA/Xem, PCI/Xem, PCI/Xr 
15	
16	Limitations:
17	------------
18	Currently the driver only autoprobes for supported PCI boards. 
19	
20	The Linux MAKEDEV command does not support generating the Digiboard
21	Devices.  Users executing digiConfig to setup EISA and PC series cards
22	will have their device nodes automatically constructed (cud?? for ~CLOCAL,
23	and ttyD?? for CLOCAL).  Users wishing to boot their board from the LILO
24	prompt, or those users booting PCI cards may use buildDIGI to construct 
25	the necessary nodes. 
26	
27	Notes:
28	------
29	This driver may be configured via LILO.  For users who have already configured
30	their driver using digiConfig, configuring from LILO will override previous 
31	settings.  Multiple boards may be configured by issuing multiple LILO command 
32	lines.  For examples see the bottom of this document.
33	
34	Device names start at 0 and continue up.  Beware of this as previous Digi 
35	drivers started device names with 1.
36	
37	PCI boards are auto-detected and configured by the driver.  PCI boards will
38	be allocated device numbers (internally) beginning with the lowest PCI slot
39	first.  In other words a PCI card in slot 3 will always have higher device
40	nodes than a PCI card in slot 1. 
41	
42	LILO config examples:
43	---------------------
44	Using LILO's APPEND command, a string of comma separated identifiers or 
45	integers can be used to configure supported boards.  The six values in order 
46	are:
47	
48	   Enable/Disable this card or Override,
49	   Type of card: PC/Xe (AccelePort) (0), PC/Xeve (1), PC/Xem or PC/Xr (2), 
50	                 EISA/Xem (3), PC/64Xe (4), PC/Xi (5), 
51	   Enable/Disable alternate pin arrangement,
52	   Number of ports on this card,
53	   I/O Port where card is configured (in HEX if using string identifiers),
54	   Base of memory window (in HEX if using string identifiers), 
55	
56	NOTE : PCI boards are auto-detected and configured.  Do not attempt to 
57	configure PCI boards with the LILO append command.  If you wish to override
58	previous configuration data (As set by digiConfig), but you do not wish to
59	configure any specific card (Example if there are PCI cards in the system) 
60	the following override command will accomplish this:
61	-> append="digi=2"
62	
63	Samples:
64	   append="digiepca=E,PC/Xe,D,16,200,D0000"
65	                  or
66	   append="digi=1,0,0,16,512,851968"
67	
68	Supporting Tools:
69	-----------------
70	Supporting tools include digiDload, digiConfig, buildPCI, and ditty.  See
71	drivers/char/README.epca for more details.  Note,
72	this driver REQUIRES that digiDload be executed prior to it being used. 
73	Failure to do this will result in an ENODEV error.
74	
75	Documentation:
76	--------------
77	Complete documentation for this product may be found in the tool package. 
78	
79	Sources of information and support:
80	-----------------------------------
81	Digi Intl. support site for this product:
82	
83	->  http://www.digi.com
84	
85	Acknowledgments:
86	----------------
87	Much of this work (And even text) was derived from a similar document 
88	supporting the original public domain DigiBoard driver Copyright (C)
89	1994,1995 Troy De Jongh.  Many thanks to Christoph Lameter 
90	(christoph@lameter.com) and Mike McLagan (mike.mclagan@linux.org) who authored 
91	and contributed to the original document. 
92	
93	Changelog:
94	----------
95	10-29-04:	Update status of driver, remove dead links in document
96			James Nelson <james4765@gmail.com>
97	
98	2000 (?)	Original Document
Hide Line Numbers
About Kernel Documentation Linux Kernel Contact Linux Resources Linux Blog

Information is copyright its respective author. All material is available from the Linux Kernel Source distributed under a GPL License. This page is provided as a free service by mjmwired.net.