Based on kernel version 2.6.26. Page generated on 2008-07-16 21:13 EST.
1 To configure the Crystal CS423x sound chip and activate its DSP functions, 2 modules may be loaded in this order: 3 4 modprobe sound 5 insmod ad1848 6 insmod uart401 7 insmod cs4232 io=* irq=* dma=* dma2=* 8 9 This is the meaning of the parameters: 10 11 io--I/O address of the Windows Sound System (normally 0x534) 12 irq--IRQ of this device 13 dma and dma2--DMA channels (DMA2 may be 0) 14 15 On some cards, the board attempts to do non-PnP setup, and fails. If you 16 have problems, use Linux' PnP facilities. 17 18 To get MIDI facilities add 19 20 insmod opl3 io=* 21 22 where "io" is the I/O address of the OPL3 synthesizer. This will be shown 23 in /proc/sys/pnp and is normally 0x388.