# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/ricoh,rn5t618.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Ricoh RN5T567/RN5T618/RC5T619 PMIC

maintainers:
  - Andreas Kemnade <andreas@kemnade.info>

description: |
  Ricoh RN5T567/RN5T618/RC5T619 is a power management IC family which
  integrates 3 to 5 step-down DCDC converters, 7 to 10 low-dropout regulators,
  GPIOs, and a watchdog timer. It can be controlled through an I2C interface.
  The RN5T618/RC5T619 provides additionally a Li-ion battery charger,
  fuel gauge, and an ADC.
  The RC5T619 additionally includes USB charger detection and an RTC.

allOf:
  - if:
      properties:
        compatible:
          contains:
            const: ricoh,rn5t567
    then:
      properties:
        regulators:
          patternProperties:
            "^(DCDC[1-4]|LDO[1-5]|LDORTC[12])$":
              $ref: ../regulator/regulator.yaml
          additionalProperties: false
  - if:
      properties:
        compatible:
          contains:
            const: ricoh,rn5t618
    then:
      properties:
        regulators:
          patternProperties:
            "^(DCDC[1-3]|LDO[1-5]|LDORTC[12])$":
              $ref: ../regulator/regulator.yaml
          additionalProperties: false
  - if:
      properties:
        compatible:
          contains:
            const: ricoh,rc5t619
    then:
      properties:
        regulators:
          patternProperties:
            "^(DCDC[1-5]|LDO[1-9]|LDO10|LDORTC[12])$":
              $ref: ../regulator/regulator.yaml
          additionalProperties: false

properties:
  compatible:
    enum:
      - ricoh,rn5t567
      - ricoh,rn5t618
      - ricoh,rc5t619

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  system-power-controller:
    type: boolean
    description: |
      See Documentation/devicetree/bindings/power/power-controller.txt

  regulators:
    type: object

additionalProperties: false

required:
  - compatible
  - reg

examples:
  - |
    #include <dt-bindings/interrupt-controller/irq.h>
    i2c {
      #address-cells = <1>;
      #size-cells = <0>;
 
      pmic@32 {
        compatible = "ricoh,rn5t618";
        reg = <0x32>;
        interrupt-parent = <&gpio5>;
        interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
        system-power-controller;
 
        regulators {
          DCDC1 {
            regulator-min-microvolt = <1050000>;
            regulator-max-microvolt = <1050000>;
          };
 
          DCDC2 {
            regulator-min-microvolt = <1175000>;
            regulator-max-microvolt = <1175000>;
          };
        };
      };
    };