Based on kernel version 6.8. Page generated on 2024-03-11 21:26 EST.
| 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 |
* Broadcom Stingray Thermal
This binding describes thermal sensors that is part of Stingray SoCs.
Required properties:
- compatible : Must be "brcm,sr-thermal"
- reg : Memory where tmon data will be available.
- brcm,tmon-mask: A one cell bit mask of valid TMON sources.
Each bit represents single TMON source.
- #thermal-sensor-cells : Thermal sensor phandler
- polling-delay: Max number of milliseconds to wait between polls.
- thermal-sensors: A list of thermal sensor phandles and specifier.
specifier value is tmon ID and it should be
in correspond with brcm,tmon-mask.
- temperature: trip temperature threshold in millicelsius.
Example:
tmons {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x8f100000 0x100>;
tmon: tmon@0 {
compatible = "brcm,sr-thermal";
reg = <0x0 0x40>;
brcm,tmon-mask = <0x3f>;
#thermal-sensor-cells = <1>;
};
};
thermal-zones {
ihost0_thermal: ihost0-thermal {
polling-delay-passive = <0>;
polling-delay = <1000>;
thermal-sensors = <&tmon 0>;
trips {
cpu-crit {
temperature = <105000>;
hysteresis = <0>;
type = "critical";
};
};
};
ihost1_thermal: ihost1-thermal {
polling-delay-passive = <0>;
polling-delay = <1000>;
thermal-sensors = <&tmon 1>;
trips {
cpu-crit {
temperature = <105000>;
hysteresis = <0>;
type = "critical";
};
};
};
ihost2_thermal: ihost2-thermal {
polling-delay-passive = <0>;
polling-delay = <1000>;
thermal-sensors = <&tmon 2>;
trips {
cpu-crit {
temperature = <105000>;
hysteresis = <0>;
type = "critical";
};
};
};
ihost3_thermal: ihost3-thermal {
polling-delay-passive = <0>;
polling-delay = <1000>;
thermal-sensors = <&tmon 3>;
trips {
cpu-crit {
temperature = <105000>;
hysteresis = <0>;
type = "critical";
};
};
};
crmu_thermal: crmu-thermal {
polling-delay-passive = <0>;
polling-delay = <1000>;
thermal-sensors = <&tmon 4>;
trips {
cpu-crit {
temperature = <105000>;
hysteresis = <0>;
type = "critical";
};
};
};
nitro_thermal: nitro-thermal {
polling-delay-passive = <0>;
polling-delay = <1000>;
thermal-sensors = <&tmon 5>;
trips {
cpu-crit {
temperature = <105000>;
hysteresis = <0>;
type = "critical";
};
};
};
};
|