About Kernel Documentation Linux Kernel Contact Linux Resources Linux Blog

Documentation / ABI / testing / sysfs-bus-iio-light-lm3533-als




Custom Search

Based on kernel version 3.9. Page generated on 2013-05-02 22:53 EST.

1	What:		/sys/.../events/in_illuminance0_thresh_either_en
2	Date:		April 2012
3	KernelVersion:	3.5
4	Contact:	Johan Hovold <jhovold@gmail.com>
5	Description:
6			Event generated when channel passes one of the four thresholds
7			in each direction (rising|falling) and a zone change occurs.
8			The corresponding light zone can be read from
9			in_illuminance0_zone.
10	
11	What:		/sys/.../events/in_illuminance0_threshY_hysteresis
12	Date:		May 2012
13	KernelVersion:	3.5
14	Contact:	Johan Hovold <jhovold@gmail.com>
15	Description:
16			Get the hysteresis for thresholds Y, that is,
17			threshY_hysteresis = threshY_raising - threshY_falling
18	
19	What:		/sys/.../events/illuminance_threshY_falling_value
20	What:		/sys/.../events/illuminance_threshY_raising_value
21	Date:		April 2012
22	KernelVersion:	3.5
23	Contact:	Johan Hovold <jhovold@gmail.com>
24	Description:
25			Specifies the value of threshold that the device is comparing
26			against for the events enabled by
27			in_illuminance0_thresh_either_en (0..255), where Y in 0..3.
28	
29			Note that threshY_falling must be less than or equal to
30			threshY_raising.
31	
32			These thresholds correspond to the eight zone-boundary
33			registers (boundaryY_{low,high}) and define the five light
34			zones.
35	
36	What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance0_zone
37	Date:		April 2012
38	KernelVersion:	3.5
39	Contact:	Johan Hovold <jhovold@gmail.com>
40	Description:
41			Get the current light zone (0..4) as defined by the
42			in_illuminance0_threshY_{falling,rising} thresholds.
43	
44	What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_raw
45	Date:		May 2012
46	KernelVersion:	3.5
47	Contact:	Johan Hovold <jhovold@gmail.com>
48	Description:
49			Get output current for channel Y (0..255), that is,
50			out_currentY_currentZ_raw, where Z is the current zone.
51	
52	What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_currentZ_raw
53	Date:		May 2012
54	KernelVersion:	3.5
55	Contact:	Johan Hovold <jhovold@gmail.com>
56	Description:
57			Set the output current for channel out_currentY when in zone
58			Z (0..255), where Y in 0..2 and Z in 0..4.
59	
60			These values correspond to the ALS-mapper target registers for
61			ALS-mapper Y + 1.
Hide Line Numbers
About Kernel Documentation Linux Kernel Contact Linux Resources Linux Blog
Information is copyright its respective author. All material is available from the Linux Kernel Source distributed under a GPL License. This page is provided as a free service by mjmwired.net.