Documentation / devicetree / bindings / mtd / flctl-nand.txt


Based on kernel version 6.8. Page generated on 2024-03-11 21:26 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49
FLCTL NAND controller

Required properties:
- compatible : "renesas,shmobile-flctl-sh7372"
- reg : Address range of the FLCTL
- interrupts : flste IRQ number
- nand-bus-width : bus width to NAND chip

Optional properties:
- dmas: DMA specifier(s)
- dma-names: name for each DMA specifier. Valid names are
	     "data_tx", "data_rx", "ecc_tx", "ecc_rx"

The DMA fields are not used yet in the driver but are listed here for
completing the bindings.

The device tree may optionally contain sub-nodes describing partitions of the
address space. See partition.txt for more detail.

Example:

	flctl@e6a30000 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "renesas,shmobile-flctl-sh7372";
		reg = <0xe6a30000 0x100>;
		interrupts = <0x0d80>;

		nand-bus-width = <16>;

		dmas = <&dmac 1 /* data_tx */
			&dmac 2;> /* data_rx */
		dma-names = "data_tx", "data_rx";

		system@0 {
			label = "system";
			reg = <0x0 0x8000000>;
		};

		userdata@8000000 {
			label = "userdata";
			reg = <0x8000000 0x10000000>;
		};

		cache@18000000 {
			label = "cache";
			reg = <0x18000000 0x8000000>;
		};
	};