Documentation / devicetree / bindings / mtd / ingenic,nand.yaml


Based on kernel version 6.8. Page generated on 2024-03-11 21:26 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/mtd/ingenic,nand.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Ingenic SoCs NAND controller

maintainers:
  - Paul Cercueil <paul@crapouillou.net>

allOf:
  - $ref: nand-controller.yaml#
  - $ref: /schemas/memory-controllers/ingenic,nemc-peripherals.yaml#

properties:
  compatible:
    enum:
      - ingenic,jz4740-nand
      - ingenic,jz4725b-nand
      - ingenic,jz4780-nand

  reg:
    items:
      - description: Bank number, offset and size of first attached NAND chip
      - description: Bank number, offset and size of second attached NAND chip
      - description: Bank number, offset and size of third attached NAND chip
      - description: Bank number, offset and size of fourth attached NAND chip
    minItems: 1

  ecc-engine: true

  partitions:
    type: object
    deprecated: true
    description:
      Node containing description of fixed partitions.

patternProperties:
  "^nand@[a-f0-9]$":
    type: object
    $ref: raw-nand-chip.yaml
    properties:

      rb-gpios:
        description: GPIO specifier for the busy pin.
        maxItems: 1

      wp-gpios:
        description: GPIO specifier for the write-protect pin.
        maxItems: 1

    unevaluatedProperties: false

required:
  - compatible
  - reg

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
    memory-controller@13410000 {
        compatible = "ingenic,jz4780-nemc";
        reg = <0x13410000 0x10000>;
        #address-cells = <2>;
        #size-cells = <1>;
        ranges = <1 0 0x1b000000 0x1000000>,
                 <2 0 0x1a000000 0x1000000>,
                 <3 0 0x19000000 0x1000000>,
                 <4 0 0x18000000 0x1000000>,
                 <5 0 0x17000000 0x1000000>,
                 <6 0 0x16000000 0x1000000>;
 
        clocks = <&cgu JZ4780_CLK_NEMC>;
 
        nand-controller@1 {
            compatible = "ingenic,jz4780-nand";
            reg = <1 0 0x1000000>;
 
            #address-cells = <1>;
            #size-cells = <0>;
 
            ecc-engine = <&bch>;
 
            ingenic,nemc-tAS = <10>;
            ingenic,nemc-tAH = <5>;
            ingenic,nemc-tBP = <10>;
            ingenic,nemc-tAW = <15>;
            ingenic,nemc-tSTRV = <100>;
 
            pinctrl-names = "default";
            pinctrl-0 = <&pins_nemc>;
 
            nand@1 {
                reg = <1>;
 
                nand-ecc-step-size = <1024>;
                nand-ecc-strength = <24>;
                nand-ecc-mode = "hw";
                nand-on-flash-bbt;
 
                pinctrl-names = "default";
                pinctrl-0 = <&pins_nemc_cs1>;
 
                partitions {
                    compatible = "fixed-partitions";
                    #address-cells = <2>;
                    #size-cells = <2>;
 
                    partition@0 {
                        label = "u-boot-spl";
                        reg = <0x0 0x0 0x0 0x800000>;
                    };
 
                    partition@800000 {
                        label = "u-boot";
                        reg = <0x0 0x800000 0x0 0x200000>;
                    };
 
                    partition@a00000 {
                        label = "u-boot-env";
                        reg = <0x0 0xa00000 0x0 0x200000>;
                    };
 
                    partition@c00000 {
                        label = "boot";
                        reg = <0x0 0xc00000 0x0 0x4000000>;
                    };
 
                    partition@4c00000 {
                        label = "system";
                        reg = <0x0 0x4c00000 0x1 0xfb400000>;
                    };
                };
            };
        };
    };