# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/mediatek,mt7621-pcie.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: MediaTek MT7621 PCIe controller

maintainers:
  - Sergio Paracuellos <sergio.paracuellos@gmail.com>

description: |+
  MediaTek MT7621 PCIe subsys supports a single Root Complex (RC)
  with 3 Root Ports. Each Root Port supports a Gen1 1-lane Link

allOf:
  - $ref: /schemas/pci/pci-bus.yaml#

properties:
  compatible:
    const: mediatek,mt7621-pci

  reg:
    items:
      - description: host-pci bridge registers
      - description: pcie port 0 RC control registers
      - description: pcie port 1 RC control registers
      - description: pcie port 2 RC control registers

  ranges:
    maxItems: 2

patternProperties:
  '^pcie@[0-2],0$':
    type: object
    $ref: /schemas/pci/pci-bus.yaml#

    properties:
      resets:
        maxItems: 1

      clocks:
        maxItems: 1

      phys:
        maxItems: 1

      phy-names:
        pattern: '^pcie-phy[0-2]$'

    required:
      - "#interrupt-cells"
      - interrupt-map-mask
      - interrupt-map
      - resets
      - clocks
      - phys
      - phy-names
      - ranges

    unevaluatedProperties: false

required:
  - compatible
  - reg
  - ranges
  - "#interrupt-cells"
  - interrupt-map-mask
  - interrupt-map
  - reset-gpios

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/mips-gic.h>
 
    pcie: pcie@1e140000 {
        compatible = "mediatek,mt7621-pci";
        reg = <0x1e140000 0x100>,
              <0x1e142000 0x100>,
              <0x1e143000 0x100>,
              <0x1e144000 0x100>;
 
        #address-cells = <3>;
        #size-cells = <2>;
        pinctrl-names = "default";
        pinctrl-0 = <&pcie_pins>;
        device_type = "pci";
        ranges = <0x02000000 0 0x60000000 0x60000000 0 0x10000000>,  /* pci memory */
                 <0x01000000 0 0x1e160000 0x1e160000 0 0x00010000>;  /* io space */
        #interrupt-cells = <1>;
        interrupt-map-mask = <0xF800 0 0 0>;
        interrupt-map = <0x0000 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>,
                        <0x0800 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
                        <0x1000 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
        reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
 
        pcie@0,0 {
            reg = <0x0000 0 0 0 0>;
            #address-cells = <3>;
            #size-cells = <2>;
            device_type = "pci";
            #interrupt-cells = <1>;
            interrupt-map-mask = <0 0 0 0>;
            interrupt-map = <0 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>;
            resets = <&rstctrl 24>;
            clocks = <&clkctrl 24>;
            phys = <&pcie0_phy 1>;
            phy-names = "pcie-phy0";
            ranges;
        };
 
        pcie@1,0 {
            reg = <0x0800 0 0 0 0>;
            #address-cells = <3>;
            #size-cells = <2>;
            device_type = "pci";
            #interrupt-cells = <1>;
            interrupt-map-mask = <0 0 0 0>;
            interrupt-map = <0 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
            resets = <&rstctrl 25>;
            clocks = <&clkctrl 25>;
            phys = <&pcie0_phy 1>;
            phy-names = "pcie-phy1";
            ranges;
        };
 
        pcie@2,0 {
            reg = <0x1000 0 0 0 0>;
            #address-cells = <3>;
            #size-cells = <2>;
            device_type = "pci";
            #interrupt-cells = <1>;
            interrupt-map-mask = <0 0 0 0>;
            interrupt-map = <0 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
            resets = <&rstctrl 26>;
            clocks = <&clkctrl 26>;
            phys = <&pcie2_phy 0>;
            phy-names = "pcie-phy2";
            ranges;
        };
    };
...