Documentation / devicetree / bindings / phy / socionext,uniphier-usb3ss-phy.yaml


Based on kernel version 6.8. Page generated on 2024-03-11 21:26 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/phy/socionext,uniphier-usb3ss-phy.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Socionext UniPhier USB3 Super-Speed (SS) PHY

description: |
  This describes the devicetree bindings for PHY interfaces built into
  USB3 controller implemented on Socionext UniPhier SoCs.
  Although the controller includes High-Speed PHY and Super-Speed PHY,
  this describes about Super-Speed PHY.

maintainers:
  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>

properties:
  compatible:
    enum:
      - socionext,uniphier-pro4-usb3-ssphy
      - socionext,uniphier-pro5-usb3-ssphy
      - socionext,uniphier-pxs2-usb3-ssphy
      - socionext,uniphier-ld20-usb3-ssphy
      - socionext,uniphier-pxs3-usb3-ssphy
      - socionext,uniphier-nx1-usb3-ssphy

  reg:
    maxItems: 1
 
  "#phy-cells":
    const: 0

  clocks:
    minItems: 2
    maxItems: 3

  clock-names: true

  resets:
    maxItems: 2

  reset-names: true

  vbus-supply:
    description: A phandle to the regulator for USB VBUS, only for USB host

allOf:
  - if:
      properties:
        compatible:
          contains:
            enum:
              - socionext,uniphier-pro4-usb3-ssphy
              - socionext,uniphier-pro5-usb3-ssphy
    then:
      properties:
        clocks:
          minItems: 2
          maxItems: 2
        clock-names:
          items:
            - const: gio
            - const: link
        resets:
          minItems: 2
          maxItems: 2
        reset-names:
          items:
            - const: gio
            - const: link
  - if:
      properties:
        compatible:
          contains:
            enum:
              - socionext,uniphier-pxs2-usb3-ssphy
              - socionext,uniphier-ld20-usb3-ssphy
    then:
      properties:
        clocks:
          minItems: 2
          maxItems: 2
        clock-names:
          items:
            - const: link
            - const: phy
        resets:
          minItems: 2
          maxItems: 2
        reset-names:
          items:
            - const: link
            - const: phy
  - if:
      properties:
        compatible:
          contains:
            enum:
              - socionext,uniphier-pxs3-usb3-ssphy
              - socionext,uniphier-nx1-usb3-ssphy
    then:
      properties:
        clocks:
          minItems: 2
          maxItems: 3
        clock-names:
          minItems: 2
          items:
            - const: link
            - const: phy
            - const: phy-ext
        resets:
          minItems: 2
          maxItems: 2
        reset-names:
          items:
            - const: link
            - const: phy

required:
  - compatible
  - reg
  - "#phy-cells"
  - clocks
  - clock-names
  - resets
  - reset-names

additionalProperties: false

examples:
  - |
    usb_ssphy0: phy@300 {
        compatible = "socionext,uniphier-ld20-usb3-ssphy";
        reg = <0x300 0x10>;
        #phy-cells = <0>;
        clock-names = "link", "phy";
        clocks = <&sys_clk 14>, <&sys_clk 16>;
        reset-names = "link", "phy";
        resets = <&sys_rst 14>, <&sys_rst 16>;
        vbus-supply = <&usb_vbus0>;
    };