# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/phy/ti,phy-am654-serdes.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: TI AM654 SERDES

description:
  This binding describes the TI AM654 SERDES. AM654 SERDES can be configured
  to be used with either PCIe or USB or SGMII.

maintainers:
  - Kishon Vijay Abraham I <kishon@ti.com>

properties:
  compatible:
    enum:
      - ti,phy-am654-serdes

  reg:
    maxItems: 1

  reg-names:
    items:
      - const: serdes

  power-domains:
    maxItems: 1

  clocks:
    maxItems: 3
    description:
      Three input clocks referring to left input reference clock, refclk and right input reference
      clock.
 
  '#phy-cells':
    const: 2
    description:
      The 1st cell corresponds to the phy type (should be one of the types specified in
      include/dt-bindings/phy/phy.h) and the 2nd cell should be the serdes lane function.

  ti,serdes-clk:
    description: Phandle to the SYSCON entry required for configuring SERDES clock selection.
    $ref: /schemas/types.yaml#/definitions/phandle
 
  '#clock-cells':
    const: 1

  mux-controls:
    maxItems: 1
    description: Phandle to the SYSCON entry required for configuring SERDES lane function.

  clock-output-names:
    oneOf:
      - description: Clock output names for SERDES 0
        items:
          - const: serdes0_cmu_refclk
          - const: serdes0_lo_refclk
          - const: serdes0_ro_refclk
      - description: Clock output names for SERDES 1
        items:
          - const: serdes1_cmu_refclk
          - const: serdes1_lo_refclk
          - const: serdes1_ro_refclk

required:
  - compatible
  - reg
  - power-domains
  - clocks
  - assigned-clocks
  - assigned-clock-parents
  - ti,serdes-clk
  - mux-controls
  - clock-output-names

additionalProperties: false

examples:
  - |
    #include <dt-bindings/phy/phy-am654-serdes.h>
 
    serdes0: serdes@900000 {
      compatible = "ti,phy-am654-serdes";
      reg = <0x900000 0x2000>;
      reg-names = "serdes";
      #phy-cells = <2>;
      power-domains = <&k3_pds 153>;
      clocks = <&k3_clks 153 4>, <&k3_clks 153 1>,
               <&serdes1 AM654_SERDES_LO_REFCLK>;
      clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk", "serdes0_ro_refclk";
      assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
      assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
      ti,serdes-clk = <&serdes0_clk>;
      mux-controls = <&serdes_mux 0>;
      #clock-cells = <1>;
    };