Documentation / devicetree / bindings / spi / rockchip-sfc.yaml


Based on kernel version 6.8. Page generated on 2024-03-11 21:26 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/spi/rockchip-sfc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Rockchip Serial Flash Controller (SFC)

maintainers:
  - Heiko Stuebner <heiko@sntech.de>
  - Chris Morgan <macromorgan@hotmail.com>

allOf:
  - $ref: spi-controller.yaml#

properties:
  compatible:
    const: rockchip,sfc
    description:
      The rockchip sfc controller is a standalone IP with version register,
      and the driver can handle all the feature difference inside the IP
      depending on the version register.

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  clocks:
    items:
      - description: Bus Clock
      - description: Module Clock

  clock-names:
    items:
      - const: clk_sfc
      - const: hclk_sfc

  power-domains:
    maxItems: 1

  rockchip,sfc-no-dma:
    description: Disable DMA and utilize FIFO mode only
    type: boolean

patternProperties:
  "^flash@[0-3]$":
    type: object
    additionalProperties: true

    properties:
      reg:
        minimum: 0
        maximum: 3

required:
  - compatible
  - reg
  - interrupts
  - clocks
  - clock-names

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/clock/px30-cru.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/power/px30-power.h>
 
    sfc: spi@ff3a0000 {
        compatible = "rockchip,sfc";
        reg = <0xff3a0000 0x4000>;
        interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
        clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
        clock-names = "clk_sfc", "hclk_sfc";
        pinctrl-0 = <&sfc_clk &sfc_cs &sfc_bus2>;
        pinctrl-names = "default";
        power-domains = <&power PX30_PD_MMC_NAND>;
        #address-cells = <1>;
        #size-cells = <0>;
 
        flash@0 {
            compatible = "jedec,spi-nor";
            reg = <0>;
            spi-max-frequency = <108000000>;
            spi-rx-bus-width = <2>;
            spi-tx-bus-width = <2>;
        };
    };

...