Based on kernel version 2.6.37. Page generated on 2011-03-22 21:57 EST.
1 PHY nodes 2 3 Required properties: 4 5 - device_type : Should be "ethernet-phy" 6 - interrupts : <a b> where a is the interrupt number and b is a 7 field that represents an encoding of the sense and level 8 information for the interrupt. This should be encoded based on 9 the information in section 2) depending on the type of interrupt 10 controller you have. 11 - interrupt-parent : the phandle for the interrupt controller that 12 services interrupts for this device. 13 - reg : The ID number for the phy, usually a small integer 14 - linux,phandle : phandle for this node; likely referenced by an 15 ethernet controller node. 16 17 Example: 18 19 ethernet-phy@0 { 20 linux,phandle = <2452000> 21 interrupt-parent = <40000>; 22 interrupts = <35 1>; 23 reg = <0>; 24 device_type = "ethernet-phy"; 25 };