Documentation / devicetree / bindings / media / i2c / sony,imx274.yaml


Based on kernel version 6.8. Page generated on 2024-03-11 21:26 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/i2c/sony,imx274.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Sony 1/2.5-Inch 8.51MP CMOS Digital Image Sensor

maintainers:
  - Leon Luo <leonl@leopardimaging.com>

description: |
  The Sony IMX274 is a 1/2.5-inch CMOS active pixel digital image sensor with an
  active array size of 3864H x 2202V. It is programmable through I2C interface.
  Image data is sent through MIPI CSI-2, which is configured as 4 lanes at 1440
  Mbps.

properties:
  compatible:
    const: sony,imx274

  reg:
    const: 0x1a

  reset-gpios:
    maxItems: 1

  clocks:
    maxItems: 1

  clock-names:
    const: inck

  vana-supply:
    description: Sensor 2.8 V analog supply.

  vdig-supply:
    description: Sensor 1.8 V digital core supply.

  vddl-supply:
    description: Sensor digital IO 1.2 V supply.

  port:
    $ref: /schemas/graph.yaml#/properties/port

required:
  - compatible
  - reg
  - port

additionalProperties: false

examples:
  - |
    i2c {
        #address-cells = <1>;
        #size-cells = <0>;
 
        imx274: camera-sensor@1a {
            compatible = "sony,imx274";
            reg = <0x1a>;
            reset-gpios = <&gpio_sensor 0 0>;
 
            port {
                sensor_out: endpoint {
                    remote-endpoint = <&csiss_in>;
                };
            };
        };
    };

...