Based on kernel version 3.9. Page generated on 2013-05-02 22:53 EST.
1 What: /sys/class/backlight/<backlight>/<ambient light zone>_max 2 What: /sys/class/backlight/<backlight>/l1_daylight_max 3 What: /sys/class/backlight/<backlight>/l2_bright_max 4 What: /sys/class/backlight/<backlight>/l3_office_max 5 What: /sys/class/backlight/<backlight>/l4_indoor_max 6 What: /sys/class/backlight/<backlight>/l5_dark_max 7 Date: May 2011 8 KernelVersion: 3.0 9 Contact: device-drivers-devel@blackfin.uclinux.org 10 Description: 11 Control the maximum brightness for <ambient light zone> 12 on this <backlight>. Values are between 0 and 127. This file 13 will also show the brightness level stored for this 14 <ambient light zone>. 15 16 What: /sys/class/backlight/<backlight>/<ambient light zone>_dim 17 What: /sys/class/backlight/<backlight>/l2_bright_dim 18 What: /sys/class/backlight/<backlight>/l3_office_dim 19 What: /sys/class/backlight/<backlight>/l4_indoor_dim 20 What: /sys/class/backlight/<backlight>/l5_dark_dim 21 Date: May 2011 22 KernelVersion: 3.0 23 Contact: device-drivers-devel@blackfin.uclinux.org 24 Description: 25 Control the dim brightness for <ambient light zone> 26 on this <backlight>. Values are between 0 and 127, typically 27 set to 0. Full off when the backlight is disabled. 28 This file will also show the dim brightness level stored for 29 this <ambient light zone>. 30 31 What: /sys/class/backlight/<backlight>/ambient_light_level 32 Date: May 2011 33 KernelVersion: 3.0 34 Contact: device-drivers-devel@blackfin.uclinux.org 35 Description: 36 Get conversion value of the light sensor. 37 This value is updated every 80 ms (when the light sensor 38 is enabled). Returns integer between 0 (dark) and 39 8000 (max ambient brightness) 40 41 What: /sys/class/backlight/<backlight>/ambient_light_zone 42 Date: May 2011 43 KernelVersion: 3.0 44 Contact: device-drivers-devel@blackfin.uclinux.org 45 Description: 46 Get/Set current ambient light zone. Reading returns 47 integer between 1..5 (1 = daylight, 2 = bright, ..., 5 = dark). 48 Writing a value between 1..5 forces the backlight controller 49 to enter the corresponding ambient light zone. 50 Writing 0 returns to normal/automatic ambient light level 51 operation. The ambient light sensing feature on these devices 52 is an extension to the API documented in 53 Documentation/ABI/stable/sysfs-class-backlight. 54 It can be enabled by writing the value stored in 55 /sys/class/backlight/<backlight>/max_brightness to 56 /sys/class/backlight/<backlight>/brightness.