About Kernel Documentation Linux Kernel Contact Linux Resources Linux Blog

Documentation / devicetree / bindings / usb / ci-hdrc-imx.txt




Custom Search

Based on kernel version 4.1. Page generated on 2015-06-28 12:11 EST.

1	* Freescale i.MX ci13xxx usb controllers
2	
3	Required properties:
4	- compatible: Should be "fsl,imx27-usb"
5	- reg: Should contain registers location and length
6	- interrupts: Should contain controller interrupt
7	- fsl,usbphy: phandle of usb phy that connects to the port
8	
9	Recommended properies:
10	- phy_type: the type of the phy connected to the core. Should be one
11	  of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
12	  property the PORTSC register won't be touched
13	- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
14	
15	Optional properties:
16	- fsl,usbmisc: phandler of non-core register device, with one argument
17	  that indicate usb controller index
18	- vbus-supply: regulator for vbus
19	- disable-over-current: disable over current detect
20	- external-vbus-divider: enables off-chip resistor divider for Vbus
21	- maximum-speed: limit the maximum connection speed to "full-speed".
22	- tpl-support: TPL (Targeted Peripheral List) feature for targeted hosts
23	
24	Examples:
25	usb@02184000 { /* USB OTG */
26		compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
27		reg = <0x02184000 0x200>;
28		interrupts = <0 43 0x04>;
29		fsl,usbphy = <&usbphy1>;
30		fsl,usbmisc = <&usbmisc 0>;
31		disable-over-current;
32		external-vbus-divider;
33		maximum-speed = "full-speed";
34		tpl-support;
35	};
Hide Line Numbers
About Kernel Documentation Linux Kernel Contact Linux Resources Linux Blog

Information is copyright its respective author. All material is available from the Linux Kernel Source distributed under a GPL License. This page is provided as a free service by mjmwired.net.