Documentation / ABI / testing / sysfs-bus-iio-ina2xx-adc


Based on kernel version 6.8. Page generated on 2024-03-11 21:26 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
What:		/sys/bus/iio/devices/iio:deviceX/in_allow_async_readout
Date:		December 2015
KernelVersion:	4.4
Contact:	linux-iio@vger.kernel.org
Description:
		By default (value '0'), the capture thread checks for the Conversion
		Ready Flag to being set prior to committing a new value to the sample
		buffer. This synchronizes the in-chip conversion rate with the
		in-driver readout rate at the cost of an additional register read.

		Writing '1' will remove the polling for the Conversion Ready Flags to
		save the additional i2c transaction, which will improve the bandwidth
		available for reading data. However, samples can be occasionally skipped
		or repeated, depending on the beat between the capture and conversion
		rates.

What:		/sys/bus/iio/devices/iio:deviceX/in_shunt_resistor
Date:		December 2015
KernelVersion:	4.4
Contact:	linux-iio@vger.kernel.org
Description:
		The value of the shunt resistor may be known only at runtime fom an
		eeprom content read by a client application. This attribute allows to
		set its value in ohms.