# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/sound/nvidia,tegra186-asrc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Tegra186 ASRC

description: |
  Asynchronous Sample Rate Converter (ASRC) converts the sampling frequency
  of the input signal from one frequency to another. It can handle over a
  wide range of sample rate ratios (freq_in/freq_out) from 1:24 to 24:1.
  ASRC has two modes of operation. One where ratio can be programmed in SW
  and the other where it gets the information from ratio estimator module.
 
  It supports  sample rate conversions in the range of 8 to 192 kHz and
  supports 6 streams upto 12 total channels. The input data size can be
  16, 24 and 32 bits.

maintainers:
  - Jon Hunter <jonathanh@nvidia.com>
  - Mohan Kumar <mkumard@nvidia.com>
  - Sameer Pujar <spujar@nvidia.com>

allOf:
  - $ref: dai-common.yaml#

properties:
  $nodename:
    pattern: "^asrc@[0-9a-f]*$"

  compatible:
    oneOf:
      - const: nvidia,tegra186-asrc
      - items:
          - enum:
              - nvidia,tegra234-asrc
              - nvidia,tegra194-asrc
          - const: nvidia,tegra186-asrc

  reg:
    maxItems: 1

  sound-name-prefix:
    pattern: "^ASRC[1-9]$"

  ports:
    $ref: /schemas/graph.yaml#/properties/ports
    description: |
      ASRC has seven input ports and six output ports. Accordingly ACIF
      (Audio Client Interfaces) port nodes are defined to represent the
      ASRC inputs (port 0 to 6) and outputs (port 7 to 12). These are
      connected to corresponding ports on AHUB (Audio Hub). Additional
      input (port 6) is for receiving ratio information from estimator.

    patternProperties:
      '^port@[0-6]':
        $ref: audio-graph-port.yaml#
        unevaluatedProperties: false
        description: ASRC ACIF input ports
      '^port@[7-9]|1[1-2]':
        $ref: audio-graph-port.yaml#
        unevaluatedProperties: false
        description: ASRC ACIF output ports

required:
  - compatible
  - reg

additionalProperties: false

examples:
  - |

    asrc@2910000 {
        compatible = "nvidia,tegra186-asrc";
        reg = <0x2910000 0x2000>;
        sound-name-prefix = "ASRC1";
    };
 
...