About Kernel Documentation Linux Kernel Contact Linux Resources Linux Blog

Documentation / hwmon / ads1015


Based on kernel version 4.16.1. Page generated on 2018-04-09 11:53 EST.

1	Kernel driver ads1015
2	=====================
3	
4	Supported chips:
5	  * Texas Instruments ADS1015
6	    Prefix: 'ads1015'
7	    Datasheet: Publicly available at the Texas Instruments website :
8	               http://focus.ti.com/lit/ds/symlink/ads1015.pdf
9	  * Texas Instruments ADS1115
10	    Prefix: 'ads1115'
11	    Datasheet: Publicly available at the Texas Instruments website :
12	               http://focus.ti.com/lit/ds/symlink/ads1115.pdf
13	
14	Authors:
15	        Dirk Eibach, Guntermann & Drunck GmbH <eibach@gdsys.de>
16	
17	Description
18	-----------
19	
20	This driver implements support for the Texas Instruments ADS1015/ADS1115.
21	
22	This device is a 12/16-bit A-D converter with 4 inputs.
23	
24	The inputs can be used single ended or in certain differential combinations.
25	
26	The inputs can be made available by 8 sysfs input files in0_input - in7_input:
27	in0: Voltage over AIN0 and AIN1.
28	in1: Voltage over AIN0 and AIN3.
29	in2: Voltage over AIN1 and AIN3.
30	in3: Voltage over AIN2 and AIN3.
31	in4: Voltage over AIN0 and GND.
32	in5: Voltage over AIN1 and GND.
33	in6: Voltage over AIN2 and GND.
34	in7: Voltage over AIN3 and GND.
35	
36	Which inputs are available can be configured using platform data or devicetree.
37	
38	By default all inputs are exported.
39	
40	Platform Data
41	-------------
42	
43	In linux/platform_data/ads1015.h platform data is defined, channel_data contains
44	configuration data for the used input combinations:
45	- pga is the programmable gain amplifier (values are full scale)
46	  0: +/- 6.144 V
47	  1: +/- 4.096 V
48	  2: +/- 2.048 V
49	  3: +/- 1.024 V
50	  4: +/- 0.512 V
51	  5: +/- 0.256 V
52	- data_rate in samples per second
53	  0: 128
54	  1: 250
55	  2: 490
56	  3: 920
57	  4: 1600
58	  5: 2400
59	  6: 3300
60	
61	Example:
62	struct ads1015_platform_data data = {
63		.channel_data = {
64			[2] = { .enabled = true, .pga = 1, .data_rate = 0 },
65			[4] = { .enabled = true, .pga = 4, .data_rate = 5 },
66		}
67	};
68	
69	In this case only in2_input (FS +/- 4.096 V, 128 SPS) and in4_input
70	(FS +/- 0.512 V, 2400 SPS) would be created.
71	
72	Devicetree
73	----------
74	
75	Configuration is also possible via devicetree:
76	Documentation/devicetree/bindings/hwmon/ads1015.txt
Hide Line Numbers


About Kernel Documentation Linux Kernel Contact Linux Resources Linux Blog