Based on kernel version 3.4. Page generated on 2012-05-21 22:08 EST.
1 Text file for the Linux SysKonnect Token Ring ISA/PCI Adapter Driver. 2 Text file by: Jay Schulist <jschlst@samba.org> 3 4 The Linux SysKonnect Token Ring driver works with the SysKonnect TR4/16(+) ISA, 5 SysKonnect TR4/16(+) PCI, SysKonnect TR4/16 PCI, and older revisions of the 6 SK NET TR4/16 ISA card. 7 8 Latest information on this driver can be obtained on the Linux-SNA WWW site. 9 Please point your browser to: 10 http://www.linux-sna.org 11 12 Many thanks to Christoph Goos for his excellent work on this driver and 13 SysKonnect for donating the adapters to Linux-SNA for the testing and 14 maintenance of this device driver. 15 16 Important information to be noted: 17 1. Adapters can be slow to open (~20 secs) and close (~5 secs), please be 18 patient. 19 2. This driver works very well when autoprobing for adapters. Why even 20 think about those nasty io/int/dma settings of modprobe when the driver 21 will do it all for you! 22 23 This driver is rather simple to use. Select Y to Token Ring adapter support 24 in the kernel configuration. A choice for SysKonnect Token Ring adapters will 25 appear. This drives supports all SysKonnect ISA and PCI adapters. Choose this 26 option. I personally recommend compiling the driver as a module (M), but if you 27 you would like to compile it statically answer Y instead. 28 29 This driver supports multiple adapters without the need to load multiple copies 30 of the driver. You should be able to load up to 7 adapters without any kernel 31 modifications, if you are in need of more please contact the maintainer of this 32 driver. 33 34 Load the driver either by lilo/loadlin or as a module. When a module using the 35 following command will suffice for most: 36 37 # modprobe sktr 38 39 This will produce output similar to the following: (Output is user specific) 40 41 sktr.c: v1.01 08/29/97 by Christoph Goos 42 tr0: SK NET TR 4/16 PCI found at 0x6100, using IRQ 17. 43 tr1: SK NET TR 4/16 PCI found at 0x6200, using IRQ 16. 44 tr2: SK NET TR 4/16 ISA found at 0xa20, using IRQ 10 and DMA 5. 45 46 Now just setup the device via ifconfig and set and routes you may have. After 47 this you are ready to start sending some tokens. 48 49 Errata: 50 For anyone wondering where to pick up the SysKonnect adapters please browse 51 to http://www.syskonnect.com 52 53 This driver is under the GNU General Public License. Its Firmware image is 54 included as an initialized C-array and is licensed by SysKonnect to the Linux 55 users of this driver. However no warranty about its fitness is expressed or 56 implied by SysKonnect. 57 58 Below find attached the setting for the SK NET TR 4/16 ISA adapters 59 ------------------------------------------------------------------- 60 61 *************************** 62 *** C O N T E N T S *** 63 *************************** 64 65 1) Location of DIP-Switch W1 66 2) Default settings 67 3) DIP-Switch W1 description 68 69 70 ============================================================== 71 CHAPTER 1 LOCATION OF DIP-SWITCH 72 ============================================================== 73 74 UÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ 75 þUÄÄÄÄÄÄ¿ UÄÄÄÄÄ¿ UÄÄÄ¿ þ 76 þAÄÄÄÄÄÄU W1 AÄÄÄÄÄU UÄÄÄÄ¿ þ þ þ 77 þUÄÄÄÄÄÄ¿ þ þ þ þ UÄÄÅ¿ 78 þAÄÄÄÄÄÄU UÄÄÄÄÄÄÄÄÄÄÄ¿ AÄÄÄÄU þ þ þ þþ 79 þUÄÄÄÄÄÄ¿ þ þ UÄÄÄ¿ AÄÄÄU AÄÄÅU 80 þAÄÄÄÄÄÄU þ TMS380C26 þ þ þ þ 81 þUÄÄÄÄÄÄ¿ þ þ AÄÄÄU AÄ¿ 82 þAÄÄÄÄÄÄU þ þ þ þ 83 þ AÄÄÄÄÄÄÄÄÄÄÄU þ þ 84 þ þ þ 85 þ AÄU 86 þ þ 87 þ þ 88 þ þ 89 þ þ 90 AÄÄÄÄÄÄÄÄÄÄÄÄAÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄAÄÄAÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄAÄÄÄÄÄÄÄÄÄU 91 AÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄU AÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄU 92 93 ============================================================== 94 CHAPTER 2 DEFAULT SETTINGS 95 ============================================================== 96 97 W1 1 2 3 4 5 6 7 8 98 +------------------------------+ 99 | ON X | 100 | OFF X X X X X X X | 101 +------------------------------+ 102 103 W1.1 = ON Adapter drives address lines SA17..19 104 W1.2 - 1.5 = OFF BootROM disabled 105 W1.6 - 1.8 = OFF I/O address 0A20h 106 107 ============================================================== 108 CHAPTER 3 DIP SWITCH W1 DESCRIPTION 109 ============================================================== 110 111 UÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄ¿ ON 112 þ 1 þ 2 þ 3 þ 4 þ 5 þ 6 þ 7 þ 8 þ 113 AÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄU OFF 114 |AD | BootROM Addr. | I/O | 115 +-+-+-------+-------+-----+-----+ 116 | | | 117 | | +------ 6 7 8 118 | | ON ON ON 1900h 119 | | ON ON OFF 0900h 120 | | ON OFF ON 1980h 121 | | ON OFF OFF 0980h 122 | | OFF ON ON 1b20h 123 | | OFF ON OFF 0b20h 124 | | OFF OFF ON 1a20h 125 | | OFF OFF OFF 0a20h (+) 126 | | 127 | | 128 | +-------- 2 3 4 5 129 | OFF x x x disabled (+) 130 | ON ON ON ON C0000 131 | ON ON ON OFF C4000 132 | ON ON OFF ON C8000 133 | ON ON OFF OFF CC000 134 | ON OFF ON ON D0000 135 | ON OFF ON OFF D4000 136 | ON OFF OFF ON D8000 137 | ON OFF OFF OFF DC000 138 | 139 | 140 +----- 1 141 OFF adapter does NOT drive SA<17..19> 142 ON adapter drives SA<17..19> (+) 143 144 145 (+) means default setting 146 147 ********************************